Dyno Tune Results

Posts specific to the 2.5 litre turbo engine

Re: Dyno Tune Results

Postby GTSPECB STI » Tue Sep 08, 2009 4:09 pm

exactly my point Hotwire. We had probably 100 people in the workshop for dynos runs as well, all generate hot air :lol:
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Re: Dyno Tune Results

Postby gtspec » Tue Sep 08, 2009 4:25 pm

dwayne wrote: What gear was this run done it ? That's a very important factor to be considered !


it was in 4th gear

Arith wrote:Adam, are you going to post where it was tuned and what it was tuned with (ie- OpenECU or EcuTek)?


Sorry Jim i left work for the day and to be honest i dont think he will know the answer to that.. he isnt too familiar with the car industry.. just likes to get things done. But i will at least find out where he got it done and that will lead us to the type of tuning software.
User avatar
gtspec
 
Posts: 864
Joined: Fri Jul 11, 2008 3:56 pm
Location: Sydney
Car: MY07 GT SpecB

Re: Dyno Tune Results

Postby gtspec » Wed Sep 09, 2009 2:41 pm

1 word.. MRT :?

he got it done at MRT and i drove his car and it actually goes pretty damn hard and so much more responsive.. i hate to say it but besides being overpriced the car feels decent..

i have yet to compare to any other cars being tuned out there but in comparison to my car, his one goes well..
User avatar
gtspec
 
Posts: 864
Joined: Fri Jul 11, 2008 3:56 pm
Location: Sydney
Car: MY07 GT SpecB

Re: Dyno Tune Results

Postby GTSPECB STI » Wed Sep 09, 2009 3:47 pm

now the important question? How much did they sting him for?
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Re: Dyno Tune Results

Postby dwayne » Wed Sep 09, 2009 4:35 pm

I'm betting around $2K
_________________________
MY07 Liberty GT Tuned by STi
User avatar
dwayne
 
Posts: 464
Joined: Tue Jul 01, 2008 10:45 pm
Location: Perth
Car: MY07 OBP 6MT GTBSTi

Re: Dyno Tune Results

Postby senator » Wed Sep 09, 2009 5:13 pm

dwayne wrote:I'm betting around $2K


if the tbe was made by MRT your lucky to get much change from $5k
Not a soobi anymore, but still slightly dirty
"TEAM TONY"
User avatar
senator
 
Posts: 3217
Joined: Sun Apr 15, 2007 8:53 pm
Location: SYDNEY

Re: Dyno Tune Results

Postby GTSPECB STI » Wed Sep 09, 2009 5:46 pm

senator wrote:
dwayne wrote:I'm betting around $2K


if the tbe was made by MRT your lucky to get much change from $5k


yep closer to the mark I believe
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Re: Dyno Tune Results

Postby dwayne » Wed Sep 09, 2009 7:29 pm

I took the "then decided to get a tune done" to mean he had the TBE fitted elsewhere, so my 2K guess was for tune only
_________________________
MY07 Liberty GT Tuned by STi
User avatar
dwayne
 
Posts: 464
Joined: Tue Jul 01, 2008 10:45 pm
Location: Perth
Car: MY07 OBP 6MT GTBSTi

Re: Dyno Tune Results

Postby smythie » Thu Sep 10, 2009 4:33 pm

gtspec wrote:
dwayne wrote: What gear was this run done it ? That's a very important factor to be considered !


it was in 4th gear
Gear makes little to no difference as far as power is concerned. Torque will change. Power at the wheels/hubs will not
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Re: Dyno Tune Results

Postby gtspec » Thu Sep 10, 2009 5:09 pm

exhaust was done elsewhere and tune cost him $2100 all up.. not bad :shock:

i think the ECUtek software cost him the most... and the actually tune was only $700 odd dollars..
im interested in his results as some of u know my ECU is already loaded with this software and unable to remove it causing me trouble finding a place to tune... but after seeing his results it doesnt look too bad.. :? :? :?

wot yous reckon, should i take the plunge
User avatar
gtspec
 
Posts: 864
Joined: Fri Jul 11, 2008 3:56 pm
Location: Sydney
Car: MY07 GT SpecB

Re: Dyno Tune Results

Postby GTSPECB STI » Thu Sep 10, 2009 6:00 pm

If your ecu is already locked with the ecutek then the key for you is finding a good tuner who uses ecutek.
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Previous

Return to 2.5T engine specific

Who is online

Users browsing this forum: No registered users and 23 guests