MY 08 2.5T Spec B 6 speed shifter knuckle.

Posts specific to the 2.5 litre turbo engine

MY 08 2.5T Spec B 6 speed shifter knuckle.

Postby WhiteYeti » Sat Jun 18, 2022 5:16 pm

Replacing the shifter knuckle/uni, the one that arrived is different to what came out. Can anyone tell me if the new one is ok to use or just swap the bush's around and refit the old. Car is a MY 08 2.5T GT Spec B 6 speed manual.
Cheers Whiteyeti.
Attachments
20220618_171525.jpg
20220618_171525.jpg (208.91 KiB) Viewed 758 times
20220618_170239.jpg
20220618_170239.jpg (226.79 KiB) Viewed 758 times
20220618_170008.jpg
20220618_170008.jpg (176.56 KiB) Viewed 758 times
20220618_170506.jpg
20220618_170506.jpg (255.46 KiB) Viewed 758 times
So ist Das Leben
User avatar
WhiteYeti
 
Posts: 11
Joined: Sat Jul 25, 2015 7:11 pm
Car: MY 08 GT Spec B, MY 10 Gen 5 2.5i

Re: MY 08 2.5T Spec B 6 speed shifter knuckle.

Postby BillyCorgi » Sat Jun 18, 2022 5:20 pm

Subaru do not support a Shifter Knucle Assembly for the 6MT Spec-B
If you try to install a Shifter Knucle Assembly from a %MT the gear lever will kick over toward the hand barake as the two Shifter Knucle Assembly designs are different.
You should be able to transplant the bushes from the repalcement unit into your old assembly.
As you can see, your original joint is offset, so you must be carefull to reassemble with the offset set to the correct side.

However.....If you need replacement bushes, contact CorgiWerx
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1746
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: MY 08 2.5T Spec B 6 speed shifter knuckle.

Postby WhiteYeti » Sat Jun 18, 2022 6:40 pm

Thnxs for the reply Corgi, I thought that may have been the case just double checking. I'll swap the bush's over for now and refit if the bush's fit. If they don't I'll get in contact. Cheers.
So ist Das Leben
User avatar
WhiteYeti
 
Posts: 11
Joined: Sat Jul 25, 2015 7:11 pm
Car: MY 08 GT Spec B, MY 10 Gen 5 2.5i

Re: MY 08 2.5T Spec B 6 speed shifter knuckle.

Postby BillyCorgi » Sun Jun 19, 2022 10:10 am

First Image, Differences between the 6MT Shifter Joint (left) and the Gen4 Liberty 5MT Shifter Joint (right).
Hint: Notice that the 6MT shifter joint is offset. It has been given a witness mark on each part to ensure it is assembled back into the correct orientation

Image


Second image, How the 5MT Shifter Joint needs to be modified to be used on a 6MT Gearbox and reposition the gear lever back into the correct orientation

Image
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1746
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx


Return to 2.5T engine specific

Who is online

Users browsing this forum: No registered users and 5 guests