AVO cast downpipe bellmouth

[andy_mac]

http://shop.revzone.com.au/vf38-vf44-vf ... bochargers

Anyone had any experience with these, sure they look kinda crap and bulky but gives the ability to get the rest of the downpipe made up on the cheap.

[HardwareBoB]

Lots of people use them, but if you're getting a dump made anyway, you can buy the flange from ebay - http://www.ebay.com.au/itm/Turbo-Dump-D ... SwYGFUrhcd

[andy_mac]

Yea one of those was my other option. Wasn't sure whether its better going for a known bellmouth rather than hoping the local exhaust shope, albeit a good one, can make up a tidy one from scratch

[WIDELOAD]

I have a full AVO dump (albeit on a VF46)
The cast piece looks shitty, but does seem to flow pretty well. But as Matt pointed out, getting a completely custom may be a better option if you're looking at all-out flow.
Give CES racing a call, they've made a few custom dumps for people on the forum.

[andy_mac]

Change of plans, going to make up a custom turbo with a TD06SL2 turbine housing so will be needing a STI spec bellmouth instead which I know Kinugawa do, but charge a fair bit for. And of course headers/uppipe to match

[HardwareBoB]

http://www.ebay.com.au/itm/SUBARU-WRX-S ... Swc0FUqe~8
Cheaper dump head.

[andy_mac]

Nice, thats what i'm after

[andy_mac]

Also after some sort of compressor outlet flange to go from the two bolt style outlet to a 2inch sized pipe for a silicone joiner if anyones seen anything like that out in the wild, been looking through the likes of ebay and come up empty handed.

[HardwareBoB]

Also after some sort of compressor outlet flange to go from the two bolt style outlet to a 2inch sized pipe for a silicone joiner if anyones seen anything like that out in the wild, been looking through the likes of ebay and come up empty handed.

AVO make one - comes with the converter and a silicone pipe to go into the TMIC.

I'm going TD06SL2 as well...



with tomei headers:


I already had a suitable downpipe.

[andy_mac]

Awesome, i'll check them out.
Yea seen some pics of yours on facebook a few days back. You doing a 98 tune aswell as e85? Would be keen to see what kind of response it gets from 98. Still quite a while away from picking one up for mine. Can't decide whether to get a better shortblock done ahead of time so that I can get the most out of it.