Aftermarket BPVs that will fit on Process West TMIC
Posted:
Tue Dec 15, 2015 1:46 pm
by phly
What aftermarket BPVs are people with Process West TMIC using and did you have to modify the thermal lining or bonnet to fit?
I want to try get something that will fit without modifying.
Re: Aftermarket BPVs that will fit on Process West TMIC
Posted:
Tue Dec 15, 2015 6:24 pm
by bigBADbenny
Forge should fit well, very low profile and the vac/boost ref hose goes in horizontally.
Iirc TurboSmart Kompact or Kobe dual port fit too.
Re: Aftermarket BPVs that will fit on Process West TMIC
Posted:
Wed Dec 16, 2015 4:29 am
by andy_mac
Sure about the kobe? She's pretty tall compared to the kompact
Re: Aftermarket BPVs that will fit on Process West TMIC
Posted:
Wed Dec 16, 2015 6:50 am
by bigBADbenny
I eyeballed a Kompact (Iirc) and it touches enough to require some padding or clearancing IMHO.
The ability to clock the bov return outlet is another consideration, this is also possible on the Forge & GFB units, probably most BOVs.
Even the Forge is tight:
http://legacygt.com/forums/showthread.p ... 38679.htmlMoar research:
https://www.google.com.au/search?output ... s+west+bovhttps://www.google.com.au/search?q=lega ... &prmd=sivn.
Re: Aftermarket BPVs that will fit on Process West TMIC
Posted:
Thu Dec 17, 2015 9:42 am
by legacydan
Forge didnt work for me, Turbosmart Kompact fits fine, doesnt rub on anything