Aftermarket BPVs that will fit on Process West TMIC

Posts specific to the 2.0 litre Turbo engine

Aftermarket BPVs that will fit on Process West TMIC

Postby phly » Tue Dec 15, 2015 1:46 pm

What aftermarket BPVs are people with Process West TMIC using and did you have to modify the thermal lining or bonnet to fit?

I want to try get something that will fit without modifying.
phly
 
Posts: 77
Joined: Mon Mar 10, 2014 12:49 pm
Location: Sydney
Car: '05 Liberty GT Sedan 5EAT

Re: Aftermarket BPVs that will fit on Process West TMIC

Postby bigBADbenny » Tue Dec 15, 2015 6:24 pm

Forge should fit well, very low profile and the vac/boost ref hose goes in horizontally.
Iirc TurboSmart Kompact or Kobe dual port fit too.
User avatar
bigBADbenny
 
Posts: 8305
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Aftermarket BPVs that will fit on Process West TMIC

Postby andy_mac » Wed Dec 16, 2015 4:29 am

Sure about the kobe? She's pretty tall compared to the kompact
2000 JDM Legacy B4 RSK - SOLD
2006 JDM Legacy BP5 GT Spec B wagon
2011 VW T5 van 2.0L of turbo diesel awesomeness
User avatar
andy_mac
 
Posts: 476
Joined: Sun Jan 19, 2014 2:30 pm
Location: Tauranga, New Zealand
Profile URL: viewtopic.php?f=10&t=30298

Re: Aftermarket BPVs that will fit on Process West TMIC

Postby bigBADbenny » Wed Dec 16, 2015 6:50 am

I eyeballed a Kompact (Iirc) and it touches enough to require some padding or clearancing IMHO.

The ability to clock the bov return outlet is another consideration, this is also possible on the Forge & GFB units, probably most BOVs.

Even the Forge is tight:
http://legacygt.com/forums/showthread.p ... 38679.html
Moar research:
https://www.google.com.au/search?output ... s+west+bov
https://www.google.com.au/search?q=lega ... &prmd=sivn



.
User avatar
bigBADbenny
 
Posts: 8305
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Aftermarket BPVs that will fit on Process West TMIC

Postby legacydan » Thu Dec 17, 2015 9:42 am

Forge didnt work for me, Turbosmart Kompact fits fine, doesnt rub on anything
User avatar
legacydan
 
Posts: 504
Joined: Tue May 18, 2010 9:48 am
Location: Dublin, Ireland
Car: Legacy b4 jdm import
Real name: Dan


Return to 2.0T engine specific

Who is online

Users browsing this forum: No registered users and 2 guests