club.liberty.asn.au

Posted: **Fri Jun 19, 2015 8:31 pm**

TheLiberty wrote:Hey guys,
Just can't afford to do the turbo at the moment, should I just lay off the silicon inlet and catch can until my turbo blows, then do them all at once?

Like I said, not chasing massive power, just an increase over what I have now!

By the way 2JZ, don't you have labour on top of all that?
My current costs are;

definite:
-$910 delivered PhatGT Dump Pipe with Cat
-$800 tune
-$200 dump pipe installation

possible:
-$250 Silicone Inlet +MAF
-$200-250? Oil catch can
-Labour for catch can

Do all of it now - silicon inlet is a good preventative maintainence item regardless, the stock intake pipes degrade and fail, and all turbo cars should have a catch can. It stops oil going into your combustion chamber where you do NOT want it.

Posted: **Fri Jun 19, 2015 9:21 pm**

Alright will do those... I better get some more work lol

Posted: **Fri Jun 19, 2015 9:23 pm**

You will certainly notice all those without the turbo.
Good luck!

Posted: **Fri Jun 19, 2015 9:42 pm**

Cheers for the support fellas

Any ideas on where a good place to get a catch can is ?

Posted: **Sat Jun 20, 2015 1:28 am**

saikou michi

Posted: **Sat Jun 20, 2015 7:55 pm**

Hey Jslayz, they look good, will have to research to see how I can get one within the next few weeks

Posted: **Mon Jun 29, 2015 3:58 pm**

TheLiberty wrote:
Archie01 wrote:Yep beat me to it
http://www.avoturbo.com/catalog/product ... ucts_id=91

Thats what i have on my car.

How do you find the Avo dump? Still got great power increase from it?

Its a quality made dump. I dont have another dump and before and after dyno runs to compare it to but yeah it seemed to do the trick

Posted: **Wed Jul 01, 2015 2:25 pm**

I take that back about the Dump Pipe...

Apparently they aren't making them now and because I didn't put a deposit down even if they did make them I wouldn't have gotten one..

Even though, I was never told or asked to put a deposit down when I was told "they'd be ready in 3 weeks"

Very disappointed :evil:

Posted: **Thu Jul 02, 2015 1:42 pm**

Just go to an exhaust shop and see if they can fab you up one from mild steel, willing to bet the price wont be that different, and if it is, go somewhere else.

Posted: **Thu Jul 02, 2015 2:16 pm**

Here's the flange you need for the rear of the turbo

http://www.ebay.com.au/itm/Subaru-Liber ... 2352f6c2fa

Take it to a good exhaust shop and ask them to make you a 3" dump pipe similar to the pictures below.

Shouldn't cost you to much

Posted: **Thu Jul 02, 2015 11:11 pm**

Thanks for the options guys!

A company down the road from sell the 3" avo dump for my model so I might just buy that!

club.liberty.asn.au

I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual

Re: I need your advice on fix/upgrade path! 2.0GT Manual