Page 1 of 1

Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 12:19 pm
by chilledawg
Hi all just a quick question, I've decided to just do oil changes myself as it's a simple enough procedure but I'm a little confused as to which Ryco oil filter I should be using for my car, it's an 05 auto GT so it's the 2.0T engine, the Ryco site specifies a Z709 however next it is a note saying this is a transmission filter? the other one is a z436 so I just wanted to find out which filter is the correct one?

cheers

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 12:25 pm
by bosc0
Might be worth ordering a batch of Genuine Subaru ones from the States. Approx $6ea if you order 6 IIRC.

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 12:28 pm
by bass_straitener
I wouldn't be using anything but a genuine Subaru oil filter.

Plenty of good reasons to go genuine here.

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 12:43 pm
by Cupelli
05 auto GT so it's the 2.0T engine ryco oil filter

All you need to know here

rycofilters.com.au/products/oil

Hope that helps…

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 12:48 pm
by chilledawg
The ryco site tells me the z709 for the FT but the z709 is a transmission filter, it's looking like I need the z436 but I think I'll just try get an OEM one from somewhere, any ideas where I can get them from easily? im in western sydney

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 12:57 pm
by bass_straitener
Don't forget the crush ring for the sump plug too.

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 1:31 pm
by rooby
Post facelift is definitely z436 but don't know about Pre.

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 3:02 pm
by chilledawg
Ok great, it is a post face lift model so z436 it is.. now to find an easy way to get the damn plastic under tray off

thanks for the help guys!

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 3:16 pm
by Deep Heat
chilledawg wrote:Ok great, it is a post face lift model


I thought post facelifts were MY07 onwards?

And your car needs a z436.

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 3:23 pm
by chilledawg
sorry it was a hasty reply, I meant pre-face lift.. apparently my brain doesn't think properly when I'm about to finish work

Re: Which Ryco oil filter to use?

PostPosted: Mon Sep 10, 2012 7:04 pm
by rooby
Anyway, if you are going to super cheap or auto pro or repco or similar they will have a big book that will tell you which one.

Re: Which Ryco oil filter to use?

PostPosted: Tue Sep 11, 2012 9:46 pm
by dr20t
Z436

I've used ryco for the last 40,000kms. I change oil and filter every 7500kmm