club.liberty.asn.au

hey guys,
passed two days my car has been throwing a CEL.
The car would go into limp mode,not being able to rev over 2000RPM and the cruise contrl light would flash.
Found out the error code is P0607 Control Module Performance by using a bluetooth OBD2 scanner and the CEL was cleared automatically after the scan.
The CEL came back before when I was driving out of my street.

would anyone have any idea what maybe the causes?

Cheers.

A good place to start to follow this link.

http://www.motor.com/newsletters/20110410/WebFiles/TT5_Subaru.html

bass_straitener wrote:A good place to start to follow this link.

http://www.motor.com/newsletters/20110410/WebFiles/TT5_Subaru.html

Thanks Bruce.
Spoke to Matt from Kido he said it maybe either the batter or boost leak.
My battery is fairly new and checked the voltage and it was fine.
I tightened the hose clamp on the turbo inlet connecting to the turbo, still had a few rotations left before it was firm.
Hopefully that will fix the issue.
Matt said he may contact you and email you my new maps as your probably the closest person to me as I live in Mulgrave.
Shall keep you posted.
Thanks

Happy to help.

Yeah I'd start by checking your battery terminals are attached properly.

No probs on helping you install your map revisions.

Cheers.

cleaned and tightened the battery terminals no luck.
Ill check the ecu ground connections tonight.
is the ecu located on the passenger side where the green connectors are?

Just saw this

Few things it could be - check your green connectors are not plugged together

Also check for wastegate issue