Which clutch..

Posts specific to the 2.0 litre Turbo engine

Which clutch..

Postby STE J20 » Sun Sep 18, 2011 8:06 pm

Hey guys .. newbie to the site.. im in a spot of bother .. my car 2.0gt twin scroll 04 model. 5mt. jdm. was replacing the clutch ..and hav recieved the wrong parts.. the car is apart so looks like it will b for a while..any one no the clutch kit needed and flywheel.. its an exedy kit i got.. they sent me flywheel FF01 ..and clutch kit which is a pull type.. i need a push type.. help please guys .. not much info any where.. cheers
STE J20
 
Posts: 5
Joined: Sun Sep 18, 2011 7:49 pm
Car: 2.0gt twin scroll
Real name: Ste

Re: Which clutch..

Postby pyro13 » Mon Sep 19, 2011 11:51 am

Hey you should of had a better look in this section..
check out viewtopic.php?f=17&t=11572
i put in an exeedy clutch and flywheel in my car..its been about 6 months and still going well. i put the part number in the topic.. if you need anything else just ask..
i believe my mate ordered it from pep's auto parts store..
User avatar
pyro13
 
Posts: 53
Joined: Tue Aug 10, 2010 9:46 pm
Location: Sydney N.S.W
Car: MY06 Liberty GT tb STI
Real name: Jason

Re: Which clutch..

Postby STE J20 » Wed Sep 21, 2011 7:18 am

ah sweet.. ive just ordered this kit.. thnks to legacy dan and u guys.. does any 1 no were i can get the starter ring gear 4 it .. r wots the same 4 it..
STE J20
 
Posts: 5
Joined: Sun Sep 18, 2011 7:49 pm
Car: 2.0gt twin scroll
Real name: Ste

Re: Which clutch..

Postby STE J20 » Mon Oct 24, 2011 6:30 am

Hey guys.. I recieved the fjk 7731 smf kit after A THREE WEEK WAIT.. Thanks to irish poxy customs. . I hav a real prob wit flywheel.. The ring gear came off the fly when i went to start the car.. it started 1st time .. turned off car 4 a bit.. threw fresh oil in to the engine.. tried starting it again and started makin funny meshing noises.. so stoped... ripped off starter and there was the ring hangin off.. the ring gear came wit the kit fitted to the fly already.. after takin it out .. found no damage to any internals in the bell housin.. brought fly to a precision engineering shop they said ring gear is to big 4 fly.. which clearly is.. u can take it on and off by hand very easy.. it spins on fly to wit very little force.. so has any 1 else this issue r even heard about it .. it cant b welded as the balance wood b all over the place according to the shop i brought it to.. they said it wood cause vibrations and the welds might not hold.. as they r 2 diff kinds of metal.. any help ..as its needed big time...
STE J20
 
Posts: 5
Joined: Sun Sep 18, 2011 7:49 pm
Car: 2.0gt twin scroll
Real name: Ste


Return to 2.0T engine specific

Who is online

Users browsing this forum: No registered users and 1 guest