Page 1 of 1
whats the oil pressure for ez30r

Posted:
Fri Apr 02, 2010 6:23 pm
by mwboom
Hi can anyone answer the question?
thanks
Re: whats the oil pressure for ez30r

Posted:
Fri Apr 02, 2010 6:56 pm
by teK--
OIL PRESSURE (at oil temperature of 80°C (176°F)):
Standard: 135 kPa (1.4 kg/cm2, 20 psi) or more (at 600 rpm)
500 kPa (5.1 kg/cm2, 73 psi) or more (at 5,000 rpm)
Re: whats the oil pressure for ez30r

Posted:
Fri Apr 02, 2010 8:23 pm
by mwboom
Thanks Jim.
Is that Subaru verified? or where is that referenced?
thanks Mark
Re: whats the oil pressure for ez30r

Posted:
Fri Apr 02, 2010 8:47 pm
by teK--
It's from the Subaru workshop manual for the EZ30
Re: whats the oil pressure for ez30r

Posted:
Fri Apr 02, 2010 9:10 pm
by mwboom
Cheers
Re: whats the oil pressure for ez30r

Posted:
Sat Apr 03, 2010 3:49 pm
by teK--
Don't forget that those figures are absolute MINIMUM required to safely operate the engine. Realistically you should be getting at least 20-30% more in real world use so that there is a safety margin. Any less than that and you are running your oil too hot or oil viscosity choice is too low.