Page 1 of 1
Gear Ratio in 3.0R 5EAT
Posted:
Thu Feb 18, 2010 1:10 pmby RAN94A
Hi Guys,
Just need to know the gear ratio for MY06 3.0R.. i tried having a look in the owner's manual with no luck.. so i resorted to the net.
Found this site
http://www.autoweb.com.au/cms/A_104918/ ... ticle.html Which lists them as:
First 3.54
Second 2.264
Third 1.471
Fourth 1
Fifth 0.834
Sixth
Reverse 2.37
Final reduction gear ratio 3.272
can anyone confirm??
Re: Gear Ratio in 3.0R 5EAT
Posted:
Thu Feb 18, 2010 6:20 pmby 3rspecb
According to the MY06 Liberty workshop manual, what you posted above is correct.
Re: Gear Ratio in 3.0R 5EAT
Posted:
Thu Feb 18, 2010 9:29 pmby specbtommy
how coem your asking?
are you planning on doing something ?
Re: Gear Ratio in 3.0R 5EAT
Posted:
Thu Feb 18, 2010 9:57 pmby Hotwire
My guess is he needs to put figures into a road dyno spreadsheet to get accurate whp (wheel horse power) while logging data for getting a tune
Re: Gear Ratio in 3.0R 5EAT
Posted:
Fri Feb 19, 2010 8:27 amby RAN94A
Hotwire wrote:My guess is he needs to put figures into a road dyno spreadsheet to get accurate whp (wheel horse power) while logging data for getting a tune
you're half right
im actually getting west_minist to do the tuning
but essentially yep that's what it's for
Re: Gear Ratio in 3.0R 5EAT
Posted:
Fri Feb 19, 2010 12:15 pmby specbtommy
nice.
keep us imformed of how the tune goes:)
Re: Gear Ratio in 3.0R 5EAT
Posted:
Fri Feb 26, 2010 10:47 pmby west_minist
I run the Dyno on Speed and rpm. Using speed, I do not need the gear. But its good to have both.
The tuning is ok. We have improve driving, but I guess everyone is giving me time as I just had a baby like Tuesday 23rd. lol
Re: Gear Ratio in 3.0R 5EAT
Posted:
Wed Dec 24, 2014 5:34 pmby JMlegacy
Old post i know,
but how did you get to run the dyno using the vehicle speed? Can i send you files and u do the same?
Re: Gear Ratio in 3.0R 5EAT
Posted:
Wed Dec 24, 2014 9:12 pmby west_minist
Yes.
Send me the car weight, your weight and tyres size.