Page 1 of 1

Engine Mounts

PostPosted: Fri May 18, 2018 8:45 am
by niksta
I have to replace the engine mounts in my 3.0rb does anyone know the part numbers?
I have had a look on partsouq and couldn't find them.

Re: Engine Mounts

PostPosted: Fri May 18, 2018 1:01 pm
by sheppo9
Right hand is #41022AG021.
Left hand is #41022AG031.

Or get some proper engine mounts;
https://www.facebook.com/pg/Fkeinfab/shop/

Re: Engine Mounts

PostPosted: Fri May 18, 2018 3:19 pm
by niksta
Has anyone tried the russian motor mounts?

Re: Engine Mounts

PostPosted: Mon May 21, 2018 11:20 am
by sheppo9
No one on here that I've seen, thou he regularly posts about shipping them here and NZ.
They are on my 'to get' list.

Re: Engine Mounts KEINFAB

PostPosted: Thu May 31, 2018 2:07 am
by peanutau
Hi guys,

I just bought a set of KEINFAB mounts for my ez30 and 6mt for my gen4 wagon. Kein seems a nice bloke and was UBER helpful. When I queried him about the mounts he was really happy to give me details and pricing, and sent me a colour swatch so I could choose which colour I wanted. He then insisted I did not pay until he had manufactured and painted them, kept me in the loop with the process and sent photos of my completed mounts. I'll post again once I've received them and let you know what they are like. He sent me tracking info once he'd sent them on the 28th and they're now on their way.

I had been chasing new engine mounts for a while but didn't really want squishy factory mounts or pitiful excuses for aftermarket replacements. In the end the Keinfab mounts actually turned out to be cheaper, even with the shipping, than ebay mounts.

Re: Engine Mounts KEINFAB

PostPosted: Sun Jun 03, 2018 2:14 pm
by applegeek897
peanutau wrote:Hi guys,

I just bought a set of KEINFAB mounts for my ez30 and 6mt for my gen4 wagon. Kein seems a nice bloke and was UBER helpful. When I queried him about the mounts he was really happy to give me details and pricing, and sent me a colour swatch so I could choose which colour I wanted. He then insisted I did not pay until he had manufactured and painted them, kept me in the loop with the process and sent photos of my completed mounts. I'll post again once I've received them and let you know what they are like. He sent me tracking info once he'd sent them on the 28th and they're now on their way.

I had been chasing new engine mounts for a while but didn't really want squishy factory mounts or pitiful excuses for aftermarket replacements. In the end the Keinfab mounts actually turned out to be cheaper, even with the shipping, than ebay mounts.


Interesting stuff mate. Keen to hear what you have to say about them. I need new mounts too but I'm not sure if I want the extra NVH these might provide. Let us know your thoughts on them.

Re: Engine Mounts KEINFAB

PostPosted: Mon Jun 04, 2018 1:19 pm
by sheppo9
peanutau wrote:
I just bought a set of KEINFAB mounts for my ez30 and 6mt.


So the engine and g/box mounts?
How much was the shipped total?

Re: Engine Mounts KEINFAB

PostPosted: Wed Jun 06, 2018 9:20 am
by applegeek897
sheppo9 wrote:
peanutau wrote:
I just bought a set of KEINFAB mounts for my ez30 and 6mt.


So the engine and g/box mounts?
How much was the shipped total?


I've been quoted,

Engine: 160 + 80 for shipping
6MT: 75 + 67 for shipping

All of that in USD. In any colour you'd like.

Re: Engine Mounts

PostPosted: Mon Jun 11, 2018 11:17 pm
by dan_ashcroft
I don't use FB anymore, so if you want to organise I'd go halves in postage with you. Will go 1 each of EZ30 & 6MT. Prefer someone in Sydney so I can do local payment and pickup once here.

Re: Engine Mounts

PostPosted: Wed Aug 29, 2018 9:29 pm
by Hutchy
So I am in the same boat with my engine mounts I fear as I had to replace the gearbox mount for my 3.0R 6MT sedan.

I bought an STI Group N gearbox mount but this has created a thump in the drive train so I suspect that I also need new engine mounts and a pitch mount. Its at 118,000 klm for a 2007 model, so the age is probably about right.

I will get under the car again to check probably next weekend, but I am struggling to find an after market quality set suitable.

Again, if the Russian ones don't tranfer any further noise into the cabin I am keen to buy as well. I am located in Brisbane though.

Re: Engine Mounts

PostPosted: Fri Sep 07, 2018 8:04 pm
by dan_ashcroft
For the pitch mount, contact Paul from Street to Track, he can provide you with Superpro,
see here: http://forum.liberty.asn.au/viewtopic.php?f=69&t=35032
This aluminium pitch mount will add a little bit more noise compared to stock, it channels a bit of g/box whine up to the firewall. If that's an issue, track down a Subaru version, I think there might have been an STI or Group N version..?

Re noise from improved engine mounts, I wouldn't think that they would be as quiet as OEM...

Re: Engine Mounts

PostPosted: Sat Sep 08, 2018 7:37 am
by Hutchy
I have ordered some OEM ones now. I got hold of a friend of the guy who makes the Kein ones, and he said that they make a heap of extra noise. I think if I had a couple of large turbos strapped to each side of the motor it would make sense, but its a stocker so I guess in another 100k they will just need replacing again...