Wanting Raptor H6 CAI

Posts specific to the 3.0 litre NA H6 engine

Wanting Raptor H6 CAI

Postby jackhinkley » Mon Feb 05, 2018 2:15 pm

Hi guys, I'm after a CAI set for my '05 Spec B Liberty and Tim unfortunately doesn't make them any more. Is anyone selling a used system, or has anyone had experience with other options?
jackhinkley
 
Posts: 4
Joined: Fri Jan 20, 2017 3:34 pm
Car: '06 Spec B

Re: Wanting Raptor H6 CAI

Postby Tradewind » Wed Feb 14, 2018 7:48 pm

There were only 6 produced - eventually you must get lucky

1 is in NZ, the other 5 in AU
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2020
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Wanting Raptor H6 CAI

Postby jackhinkley » Thu Feb 15, 2018 3:40 am

Ah. I knew you stopped making them but I didn't realise that the run was so limited; I didn't think there's be much of a payoff for the design investment for so few to be made. I guess my luck is up, I'm super keen if ever you decide to make more for any reason though.
jackhinkley
 
Posts: 4
Joined: Fri Jan 20, 2017 3:34 pm
Car: '06 Spec B

Re: Wanting Raptor H6 CAI

Postby Tradewind » Thu Apr 19, 2018 8:43 pm

New batch this year
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2020
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Wanting Raptor H6 CAI

Postby StackAttack » Sun Apr 22, 2018 7:22 pm

I, too, am wanting a CAI. Is there any way I can be notified when they come into stock?
StackAttack
 
Posts: 4
Joined: Mon Apr 06, 2015 10:23 pm
Location: Brisbane
Car: 2004 Spec.B

Re: Wanting Raptor H6 CAI

Postby Tradewind » Sun Apr 22, 2018 7:24 pm

I will report it here on the CAI thread.

A very limited run will be made - maybe 8 items, however if I can get confirmed orders I may increase that a little
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2020
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Wanting Raptor H6 CAI

Postby Flat6Estate » Wed Apr 25, 2018 10:32 am

Any difference to the original design Tim?
MY08 Spec B 3.0L Manual Wagon
1998 Yamaha YZF600R Thundercat - a bit broken :-o
User avatar
Flat6Estate
formerly Timbo_rs2500
 
Posts: 374
Joined: Mon Jun 17, 2013 2:15 pm
Location: Lower Blue Mountains NSW
Car: 2007 MY08 Liberty Wagon 3RB 6spd
Real name: Tim
Profile URL: viewtopic.php?f=10&t=32189&p=425885#p425885

Re: Wanting Raptor H6 CAI

Postby Tradewind » Wed Apr 25, 2018 10:51 am

Not planning any changes for it - no

Was near enough to perfect
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2020
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Wanting Raptor H6 CAI

Postby 666 » Thu Apr 26, 2018 6:17 pm

Tradewind wrote:Not planning any changes for it - no

Was near enough to perfect


I fitted mine over two years ago and Matt tuned it to suit my car and I can say that it has performed flawlessly. It's not noisy and under bonnet you'd think that it was done from the factory, so cudos to Tim at Raptor. You do need the tune so factor that in when you get it. Don't try driving around before Tim tunes it because it will upset your AFM and possibly lean out, that's the increase in airflow it gives. I would love to have a E85 tune with the CAI fitted as this would be the highest level of tune on a NA H6 possible, with Raptor headers of course.

Rob
666
 
Posts: 122
Joined: Sat May 28, 2011 10:21 am
Car: Spec.B
Real name: Rob

Re: Wanting Raptor H6 CAI

Postby Tradewind » Thu Apr 26, 2018 6:36 pm

666 wrote:
Tradewind wrote:Not planning any changes for it - no

Was near enough to perfect


I fitted mine over two years ago and Matt tuned it to suit my car and I can say that it has performed flawlessly. It's not noisy and under bonnet you'd think that it was done from the factory, so cudos to Tim at Raptor. You do need the tune so factor that in when you get it. Don't try driving around before Tim tunes it because it will upset your AFM and possibly lean out, that's the increase in airflow it gives. I would love to have a E85 tune with the CAI fitted as this would be the highest level of tune on a NA H6 possible, with Raptor headers of course.

Rob


Rob - appreciate the owner feedback

As Rob said, you must have the tune installed at the same time you fit the intake or engine damage will occur. This has always been the case, you book your tune with Matt and you install the CAI when you get tune file

Rob, check with Matt, E85 and RAM CAI may soon be compatible, some work around coming into being apparently
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2020
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim


Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 1 guest