Induction Method

Posts specific to the 3.0 litre NA H6 engine

Induction Method

Postby Bazwald » Sun May 14, 2017 11:52 pm

Anyone on here fitted a CAI or like a prova air scoop and want to talk about their experiences?
Is it a meaningful mod or a waste of time?
Cheers,
-Seb
Current Mod List: TBSTI Mufflers, 2.25inch cat back, HID lights and Angel Eyes, Cusco strut brace, KIDO ECU retune, intake resonator delete, raptor headers, custom Stainless Y-pipe with 100 Cell Cats.
User avatar
Bazwald
 
Posts: 27
Joined: Mon Aug 08, 2016 10:13 am
Location: Hobart, Tas
Car: MY05 3.0RB Sedan
Real name: Sebastian

Re: Induction Method

Postby 666 » Fri May 19, 2017 9:27 pm

Seb, the only fully developed CAI for the H6 is by Raptor Superchargers, give Tim (the owner) a call to see if he has any in stock. I have one fitted as do others on this site and it improves throttle response and intake flow. A tune is mandatory to configure the AF ratios but it really does open up the H6's breathing, that and a set of Raptor headers and a free flow exhaust will make a difference.

Rob.
666
 
Posts: 122
Joined: Sat May 28, 2011 10:21 am
Car: Spec.B
Real name: Rob

Re: Induction Method

Postby Bazwald » Sun May 21, 2017 5:00 pm

Cheers Rob.
The only thing about the Raptor RAM is I thought I read somewhere on a thread that pre-FL Libs ECU's weren't compatible for the retune necessary for it to work correctly.
-Seb.
Current Mod List: TBSTI Mufflers, 2.25inch cat back, HID lights and Angel Eyes, Cusco strut brace, KIDO ECU retune, intake resonator delete, raptor headers, custom Stainless Y-pipe with 100 Cell Cats.
User avatar
Bazwald
 
Posts: 27
Joined: Mon Aug 08, 2016 10:13 am
Location: Hobart, Tas
Car: MY05 3.0RB Sedan
Real name: Sebastian

Re: Induction Method

Postby Surge » Sun May 21, 2017 5:34 pm

Worth speaking to Matt from kidotuning / throttlehappy.

Somewhere in my mind I have a feeling that he is able to tune those as well.
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 789
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: Induction Method

Postby Bazwald » Mon May 22, 2017 1:50 pm

Yeah, probably worth a shot.
Current Mod List: TBSTI Mufflers, 2.25inch cat back, HID lights and Angel Eyes, Cusco strut brace, KIDO ECU retune, intake resonator delete, raptor headers, custom Stainless Y-pipe with 100 Cell Cats.
User avatar
Bazwald
 
Posts: 27
Joined: Mon Aug 08, 2016 10:13 am
Location: Hobart, Tas
Car: MY05 3.0RB Sedan
Real name: Sebastian

Re: Induction Method

Postby Curley5959 » Mon May 22, 2017 9:02 pm

Raptor RAM CAI are no longer being made. I enquired a while ago about purchasing one. Still looking for a suitable CAI.
User avatar
Curley5959
 
Posts: 190
Joined: Sat Oct 04, 2014 1:05 pm
Location: Sussex Inlet, NSW
Car: 07 Forester XT
Real name: Aaron
Profile URL: viewtopic.php?f=10&t=27640

Re: Induction Method

Postby Bazwald » Tue May 23, 2017 9:58 am

Bugger, I'll have to see if there is anything DIY I can have a a crack at.
Current Mod List: TBSTI Mufflers, 2.25inch cat back, HID lights and Angel Eyes, Cusco strut brace, KIDO ECU retune, intake resonator delete, raptor headers, custom Stainless Y-pipe with 100 Cell Cats.
User avatar
Bazwald
 
Posts: 27
Joined: Mon Aug 08, 2016 10:13 am
Location: Hobart, Tas
Car: MY05 3.0RB Sedan
Real name: Sebastian

Re: Induction Method

Postby dan_ashcroft » Tue May 23, 2017 8:21 pm

I think Tim at Raptor was caught out last time as a few people said they wanted them, but only 2 went ahead straight away (myself being one of them) and the rest sat around for a long time. If you could get enough people together that would make solid commitments (deposits?), would he do another run? I don't know, just thinking out aloud. I am sure the last run was of 5 units total.
dan_ashcroft
 
Posts: 181
Joined: Tue May 19, 2015 8:12 am
Location: Sydney
Car: MY06 3.0R-B on E85

Re: Induction Method

Postby 666 » Wed May 24, 2017 4:52 pm

Bazwald wrote:Cheers Rob.
The only thing about the Raptor RAM is I thought I read somewhere on a thread that pre-FL Libs ECU's weren't compatible for the retune necessary for it to work correctly.
-Seb.


Seb, mine is a pre FL model with the 512kb ECU. Matt from Kido Tuning tuned mine and should be able to tune yours assuming that you can get a RAM CAI from Tim at Raptor.

Rob.
666
 
Posts: 122
Joined: Sat May 28, 2011 10:21 am
Car: Spec.B
Real name: Rob

Re: Induction Method

Postby Bazwald » Wed May 24, 2017 7:18 pm

Hey Rob. That is very handy to know, thanks for that.
Dan, I dunno if I can get anyone else on board... Maybe one or two at the most unfortunately.
-Seb
Current Mod List: TBSTI Mufflers, 2.25inch cat back, HID lights and Angel Eyes, Cusco strut brace, KIDO ECU retune, intake resonator delete, raptor headers, custom Stainless Y-pipe with 100 Cell Cats.
User avatar
Bazwald
 
Posts: 27
Joined: Mon Aug 08, 2016 10:13 am
Location: Hobart, Tas
Car: MY05 3.0RB Sedan
Real name: Sebastian

Re: Induction Method

Postby Tradewind » Tue May 30, 2017 8:06 am

666 wrote:
Bazwald wrote:Cheers Rob.
The only thing about the Raptor RAM is I thought I read somewhere on a thread that pre-FL Libs ECU's weren't compatible for the retune necessary for it to work correctly.
-Seb.


Seb, mine is a pre FL model with the 512kb ECU. Matt from Kido Tuning tuned mine and should be able to tune yours assuming that you can get a RAM CAI from Tim at Raptor.

Rob.


Same with mine, it is Pre FL and has the RAM intake tuned by Matt - perfectly perfect
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2020
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Induction Method

Postby Tradewind » Tue May 30, 2017 8:07 am

If no one has noticed

There IS a RAM intake for sale in the "for sale" section RIGHT NOW
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2020
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Induction Method

Postby Bazwald » Wed Jun 21, 2017 6:54 pm

Way to late on the Raptor Intake. Anyone had any experience with aftermarket panel filters? Do they make a difference?
-Seb
Current Mod List: TBSTI Mufflers, 2.25inch cat back, HID lights and Angel Eyes, Cusco strut brace, KIDO ECU retune, intake resonator delete, raptor headers, custom Stainless Y-pipe with 100 Cell Cats.
User avatar
Bazwald
 
Posts: 27
Joined: Mon Aug 08, 2016 10:13 am
Location: Hobart, Tas
Car: MY05 3.0RB Sedan
Real name: Sebastian

Re: Induction Method

Postby Tradewind » Fri Jun 23, 2017 7:02 am

Bazwald wrote:Way to late on the Raptor Intake. Anyone had any experience with aftermarket panel filters? Do they make a difference?
-Seb


Just a little bit
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2020
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Induction Method

Postby Bazwald » Mon Jun 26, 2017 9:11 pm

Worth the investment?
Current Mod List: TBSTI Mufflers, 2.25inch cat back, HID lights and Angel Eyes, Cusco strut brace, KIDO ECU retune, intake resonator delete, raptor headers, custom Stainless Y-pipe with 100 Cell Cats.
User avatar
Bazwald
 
Posts: 27
Joined: Mon Aug 08, 2016 10:13 am
Location: Hobart, Tas
Car: MY05 3.0RB Sedan
Real name: Sebastian

Next

Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 2 guests