Lock da Gate !!!!!!!!!

Posts specific to the 3.0 litre NA H6 engine

Lock da Gate !!!!!!!!!

Postby veefa bspec » Thu Apr 30, 2015 4:44 pm

I always say its better to be Shot from a Cannon than Sqeezed out of a Tube......

I had to have the CV Boot replaced last week , passenger side, the suby dealer ship charged me 180 with parts, I was happy with that.
However on the way home I noticed when I would stop or select reverse the gear lever gets stuck in neutral or the gear im selecting. so I returned to the dealership and showed them what was happening, they kindly lifted it up on the hoist and had an inspection..........................

Verdict:: A coincidence they say, gear selector maybe getting stuck in the gate or the linkages that run down the side and above transmission might need lube.
I then asked them could they just give it a splash of lube, they said if it gets worse thell have another look but didn't lube it there and then..??
I explained that this has never happened b4 bringing it here. they say COINCEDENCE !!.


Is the centre console hard to get out and could this be the reason?????.... other than this the car seems fine..

car is H6 07 Bspec auto with flaps,---extreamly well maintained and driven like my grandma..

all advice and help much needed as im not paying yet another dealershit to stuff my car again.

as they wont without $$$$$


cheers

Veefa bspec
Better to be Shot from a Cannon Then Squeezed from a Tube......................
veefa bspec
 
Posts: 48
Joined: Sat Feb 21, 2015 10:27 am
Location: Nambucca Heads nsw
Car: 06 bspec Liberty,SS Ls1,73 HQ 1T,+
Real name: james

Re: Lock da Gate !!!!!!!!!

Postby BillyCorgi » Thu Apr 30, 2015 5:05 pm

I do not have an auto, however I do have the Factory Service Manuals.
There are no linkages, only a cable.
Faulty Shift Lock Control System?
You may need to connect the diagnostic tool to read any diagnostic trouble codes in the auto control module.
Do you have access to FreeSSM?
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1805
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: Lock da Gate !!!!!!!!!

Postby veefa bspec » Thu Apr 30, 2015 5:06 pm

???? freessm


I do have obd but it says all all ok.

Sorry well spotted, Cable is what I meant not linkage.
Last edited by veefa bspec on Thu Apr 30, 2015 5:08 pm, edited 1 time in total.
Better to be Shot from a Cannon Then Squeezed from a Tube......................
veefa bspec
 
Posts: 48
Joined: Sat Feb 21, 2015 10:27 am
Location: Nambucca Heads nsw
Car: 06 bspec Liberty,SS Ls1,73 HQ 1T,+
Real name: james

Re: Lock da Gate !!!!!!!!!

Postby BillyCorgi » Thu Apr 30, 2015 5:07 pm

free Subaru Select Monitor.
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1805
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: Lock da Gate !!!!!!!!!

Postby veefa bspec » Thu Apr 30, 2015 5:09 pm

what is that.
Better to be Shot from a Cannon Then Squeezed from a Tube......................
veefa bspec
 
Posts: 48
Joined: Sat Feb 21, 2015 10:27 am
Location: Nambucca Heads nsw
Car: 06 bspec Liberty,SS Ls1,73 HQ 1T,+
Real name: james

Re: Lock da Gate !!!!!!!!!

Postby BillyCorgi » Thu Apr 30, 2015 5:11 pm

The best bit of diagnostic kit you can have
http://www.subaruoutback.org/forums/65- ... m-tcu.html
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1805
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: Lock da Gate !!!!!!!!!

Postby veefa bspec » Thu Apr 30, 2015 5:18 pm

mmm interesting.
Better to be Shot from a Cannon Then Squeezed from a Tube......................
veefa bspec
 
Posts: 48
Joined: Sat Feb 21, 2015 10:27 am
Location: Nambucca Heads nsw
Car: 06 bspec Liberty,SS Ls1,73 HQ 1T,+
Real name: james

Re: Lock da Gate !!!!!!!!!

Postby Chunks » Sun May 03, 2015 8:31 pm

Pull the shifter trim off. There is a plastic piece that goes around the shift gate that falls off and jams it in certain gears. Common problem, i usually just throw them in the bin and it never happens again
Chunks
 
Posts: 5
Joined: Sat Apr 10, 2010 7:21 pm


Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: Google [Bot] and 8 guests