New Bspec owner ???

[BigBCalais]

How and where do I get a hold of this G88 . its not a summit is it LoL

It's garage88, they're based in Sydney

[KiDo_Tuning]

I purchased Direct OEM replacements from eBay for $320 - AFI Sensors I think. Had all sorts of trouble with them. They are not as responsive as Denso sensors and resulted in the car running very rich. Had to get a refund and purchase a Genuine Set of Denso Sensors.

http://www.ebay.com.au/itm/SUBARU-OXYGE ... 1e97939def

Expensive but did the trick. No more issues with O2 Sensors.

In future, www.partsouq.com does them for under $160 each delivered to your door and they are a genuine Subaru sensor in a genuine box

[Curley5959]

I purchased Direct OEM replacements from eBay for $320 - AFI Sensors I think. Had all sorts of trouble with them. They are not as responsive as Denso sensors and resulted in the car running very rich. Had to get a refund and purchase a Genuine Set of Denso Sensors.

http://www.ebay.com.au/itm/SUBARU-OXYGE ... 1e97939def

Expensive but did the trick. No more issues with O2 Sensors.

In future, http://www.partsouq.com does them for under $160 each delivered to your door and they are a genuine Subaru sensor in a genuine box

I am starting to use patsuoq now. Definitely a better option.

[veefa bspec]

Cheers curly re the sensors, about the temp issue thou ????

[Curley5959]

Cheers curly re the sensors, about the temp issue thou ????

The H6's do run quite hot. I have a Gen 4 H6 Liberty, my father has a Gen 4 H6 Outback, and my brother has a Gen 4 H6 Outback. All get quite hot under the bonnet and radiate a fair bit of heat, especially after a hard drive. We have just put it down to the engine size and the fact that it is an alloy block.

As long as your temperature gauge stays normal, and you make sure you have plenty of coolant in your resevoir/no leaks anywhere, you should be fine. If the temperature gauge starts to rise, time for a coolant flush..

[veefa bspec]

Cheers Curley, good advice talk soon


Bspecd