41040FE000 ROD ASSEMBLY-PITCHING STOPPER
Posted: Sat Oct 04, 2014 3:38 pmNoticed when replacing the Back Up Lamp Switch that the Pitching Stopper front bush was chopping out.
OpposedForces spare parts listings suggested that the later Gen 3 models plus the Four and Six Cylinder Gen 4 models uses the same Pitching Stopper - 41040FE000.
Being a long weekend in Sydney and having too much time on my hands plus a lathe and raw materials, I turned up a new polyurethane bush to replace the original rubber unit and used the original inner steel sleeve.
Presto, one refurbished Pitching Stopper.
The money saved will go to be spent on other nice bits elsewhere!
OpposedForces spare parts listings suggested that the later Gen 3 models plus the Four and Six Cylinder Gen 4 models uses the same Pitching Stopper - 41040FE000.
Being a long weekend in Sydney and having too much time on my hands plus a lathe and raw materials, I turned up a new polyurethane bush to replace the original rubber unit and used the original inner steel sleeve.
Presto, one refurbished Pitching Stopper.
The money saved will go to be spent on other nice bits elsewhere!