want to know were to get a decent clutch and how much i can expect to pay, just got quoted $1000 for exedy base and about $700 labor.
how about this?
http://www.ebay.com.au/itm/EXEDY-CLUTCH ... 304&_uhb=1
Australian Liberty Owners Club
clutch time
25 posts
• Page 1 of 2 • 1, 2
clutch time
by Troy » Mon Nov 04, 2013 8:38 pm
KIDO tune, resonator delete, HSD monopro coilovers, K&N filter, DBA T2 slotted, Intima SR & SS pads
-
Troy - Posts: 88
- Joined: Thu Dec 06, 2012 10:32 am
- Location: Bonny Hills near Port Macquarie NSW
- Car: 2005 3.0R B
Re: clutch time
by paggaz » Mon Nov 04, 2013 10:17 pm
Description says that's the "Exedy's Standard OEM replacement"
Which is exactly this: http://www.amazon.com/EXEDY-FJK1000-OEM ... B001B57M3G
I've heard people have gotten that kit for around $550 delivered to Aust.
Standard labor costs range from $500 to $800.
Which is exactly this: http://www.amazon.com/EXEDY-FJK1000-OEM ... B001B57M3G
I've heard people have gotten that kit for around $550 delivered to Aust.
Standard labor costs range from $500 to $800.
-
paggaz - Posts: 1237
- Joined: Wed May 30, 2012 5:56 pm
- Location: Townsville, QLD
- Car: 2007 GT Spec.B Wagon Silver
- Real name: Nathan
- Profile URL: viewtopic.php?f=10&t=17423#p241526
Re: clutch time
by Robbks » Tue Nov 05, 2013 9:45 am
coyote wrote:Sure, a GTR is fast ... but it's about as interesting as listening to grass grow.
-
Robbks - Posts: 2185
- Joined: Wed Jan 05, 2011 8:21 am
- Location: Hobart, Tas
- Car: MY06 3.0RB Wagon
- Real name: Rob
- Profile URL: viewtopic.php?f=10&t=12350
Re: clutch time
by paggaz » Tue Nov 05, 2013 11:06 am
Was actually clutch shopping/pricing locally yesterday.
Will have to give Jim Berry a call sometime.
Will have to give Jim Berry a call sometime.
-
paggaz - Posts: 1237
- Joined: Wed May 30, 2012 5:56 pm
- Location: Townsville, QLD
- Car: 2007 GT Spec.B Wagon Silver
- Real name: Nathan
- Profile URL: viewtopic.php?f=10&t=17423#p241526
Re: clutch time
by d-chang » Tue Nov 05, 2013 2:48 pm
It depends on what flywheel setup you currently have... I think most post faced Libs are solid flywheels whereas pres are dual mass. I just got mine done 2 weeks ago at a Subaru dealership for $1,650, all parts and labour included in Perth. So it was a change from dual to single mass, new oem clutch and labour.
Below car has been gone for quite some time now... blew bottom end bearing and dealership screwed me! Now driving 2008 WRX with ~65k kms on the clock. Only has cat back exhaust and tune by KiDo at the moment! More to come... but slowly!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
-
d-chang - -stickered-
- Posts: 636
- Joined: Tue Feb 21, 2012 6:29 pm
- Location: Perth, Western Australia
- Car: MY05 Liberty GT
- Real name: Daniel
- Profile URL: viewtopic.php?f=7&t=15749
Re: clutch time
by cliffo3rb » Tue Nov 05, 2013 2:55 pm
paggaz wrote:Description says that's the "Exedy's Standard OEM replacement"
Which is exactly this: http://www.amazon.com/EXEDY-FJK1000-OEM ... B001B57M3G
I've heard people have gotten that kit for around $550 delivered to Aust.
Standard labor costs range from $500 to $800.
I have this in my 3RB.Was $370 delivered and was on my doorstep in 4 days.
Have not had any problems with it in the last 10,000ks.
-
cliffo3rb - Posts: 709
- Joined: Thu May 13, 2010 9:07 am
- Location: Central Coast,NSW
- Car: MY05 Liberty 3.0rb
- Real name: Cliffo
Re: clutch time
by Robbks » Tue Nov 05, 2013 2:57 pm
d-chang wrote:It depends on what flywheel setup you currently have... I think most post faced Libs are solid flywheels whereas pres are dual mass. I just got mine done 2 weeks ago at a Subaru dealership for $1,650, all parts and labour included in Perth. So it was a change from dual to single mass, new oem clutch and labour.
nonononnononononononononono
ALL 6 SPEEDS HAVE SMF.
only povo 4pot NA's have a DMF (maybe pre-face GT's someone confirm 100%)
coyote wrote:Sure, a GTR is fast ... but it's about as interesting as listening to grass grow.
-
Robbks - Posts: 2185
- Joined: Wed Jan 05, 2011 8:21 am
- Location: Hobart, Tas
- Car: MY06 3.0RB Wagon
- Real name: Rob
- Profile URL: viewtopic.php?f=10&t=12350
Re: clutch time
by fibble » Tue Nov 05, 2013 4:39 pm
Pre f/lift 5spd GTs definitely have dual mass flywheel - 100% confirmed 
Troy - which state are you in?
Troy - which state are you in?
- fibble
- Posts: 132
- Joined: Fri Oct 09, 2009 8:58 pm
- Location: Melbourne
- Car: GT
- Real name: Fab
Re: clutch time
by Troy » Tue Nov 05, 2013 8:38 pm
Nsw bro
Excedy website and I called them its fjk 7737
Others are to suit impreza not liberty
Calling exedy again tomorrow with my vin number to double check
Excedy website and I called them its fjk 7737
Others are to suit impreza not liberty
Calling exedy again tomorrow with my vin number to double check
KIDO tune, resonator delete, HSD monopro coilovers, K&N filter, DBA T2 slotted, Intima SR & SS pads
-
Troy - Posts: 88
- Joined: Thu Dec 06, 2012 10:32 am
- Location: Bonny Hills near Port Macquarie NSW
- Car: 2005 3.0R B
Re: clutch time
by XP05UR » Thu Nov 07, 2013 10:24 am
Can't go past Jim Berry and Race Clutch... Mine is amazing..
Obsidian Black MY06 Liberty 3.0R-B wagon 6MT - SOLD
19 x 8.5" Stance SC-SIX rims - BC Racing BR coilovers - Cusco Front Under Body Brace - Cusco Strut Brace with master cylinder brace - Cusco Front and Rear Sway Bars - X Force Centre and Y Pipe - HKS ES-Premium rear mufflers - HKS Panel filter - KiDo Tune - BLITZ A/C Filter - Jim Berry Clutch Kit -15% window tint - MARS Performance LED Tailights - HID 5200K low beams - Philips H3 4000K Diamond Vision hi beams
w. https://www.maximumxposure.com.au
19 x 8.5" Stance SC-SIX rims - BC Racing BR coilovers - Cusco Front Under Body Brace - Cusco Strut Brace with master cylinder brace - Cusco Front and Rear Sway Bars - X Force Centre and Y Pipe - HKS ES-Premium rear mufflers - HKS Panel filter - KiDo Tune - BLITZ A/C Filter - Jim Berry Clutch Kit -15% window tint - MARS Performance LED Tailights - HID 5200K low beams - Philips H3 4000K Diamond Vision hi beams
w. https://www.maximumxposure.com.au
-
XP05UR - Posts: 134
- Joined: Sun Feb 26, 2012 7:22 pm
- Location: Central Coast NSW
- Car: MY06 3.0 Spec R-B Wagon
- Real name: Nath
- Profile URL: viewtopic.php?f=7&t=16956
Re: clutch time
by KiDo_Tuning » Thu Nov 07, 2013 11:28 pm
Jim Berry is great!
KiDo Racing Tunes Info: HERE
Great minds discuss ideas;
Average minds discuss events;
Small minds discuss people
Great minds discuss ideas;
Average minds discuss events;
Small minds discuss people
-
KiDo_Tuning - Posts: 2801
- Joined: Sun Jun 10, 2012 11:53 pm
- Car: Subarus + Nissans
- Real name: Matt
Re: clutch time
by P.3 » Wed Nov 13, 2013 3:31 am
the best is STI oem clutch... for 6mt
12310АА340/280 Flywheel
30210AA610/440/670/681 cover
30100AA910/920/930/710 disk
30502AA130 balls
12310АА340/280 Flywheel
30210AA610/440/670/681 cover
30100AA910/920/930/710 disk
30502AA130 balls
Legacy spec.B P.3 edition. Russia.
3.0 turbo on vf48
6 MT, 3.9 final ratio, kaaz 1.5 way in rear dif
Brembo black
Aem water/methanol
Tein comfort sport
3.0 turbo on vf48
6 MT, 3.9 final ratio, kaaz 1.5 way in rear dif
Brembo black
Aem water/methanol
Tein comfort sport
-
P.3 - Posts: 39
- Joined: Sun May 19, 2013 3:08 am
- Location: Russia
- Car: 3.0T Spec.B BL 6 MT
Re: clutch time
by SIMBAT » Wed Nov 20, 2013 9:52 pm
I just ordered a cusco clutch kit with lightweight flywheel for my 3.0R.
i'll let you know how it goes
i'll let you know how it goes
my12 VW Tiguan TDI-tuned
my16 Hyper Blue WRX STI
my16 Honda Jazz VTI
my16 Hyper Blue WRX STI
my16 Honda Jazz VTI
-
SIMBAT - Posts: 424
- Joined: Tue Sep 18, 2012 8:14 pm
- Location: north east Melbourne suburbs
- Real name: the dream tiger
Re: clutch time
by dawesy » Thu Nov 21, 2013 10:34 am
I've got a HKS LA lightweight clutch. Love it but it's definitely not a cheap option
-
dawesy - Posts: 584
- Joined: Thu Oct 11, 2012 12:07 pm
- Location: parramtta area
- Car: my05 3.0R-B sedan
- Real name: Chris
Re: clutch time
by HERLIBERTY05 » Mon Dec 09, 2013 4:33 pm
finally I am in need of a new clutch... got a price on Exedy fjk7737 for $550 pick up in Vic.
Subaru Mentone quoted $2500
Bursons quoted $1250
Repco for a Clutch Industries clutch ( never heard of this brand) $750
Im going to go for an Exedy one. had it installed in my 180sx type x and loved it.
Can anyone get it at a better price? When I bought it for my 180sx it was $270 approx and cost/trade price
Thnx
Subaru Mentone quoted $2500
Bursons quoted $1250
Repco for a Clutch Industries clutch ( never heard of this brand) $750
Im going to go for an Exedy one. had it installed in my 180sx type x and loved it.
Can anyone get it at a better price? When I bought it for my 180sx it was $270 approx and cost/trade price
Thnx
-
HERLIBERTY05 - Posts: 5
- Joined: Sat Nov 30, 2013 1:04 pm
- Location: Bayside Melbourne
- Car: Subaru Liberty 05. 3lt 6spd Spec B
25 posts
• Page 1 of 2 • 1, 2
Return to 3.0R & 3.6R engine specific
Who is online
Users browsing this forum: No registered users and 7 guests