Have you looked into doing some sway bars?
J
P.3 wrote:saffarco wrote:I like seeing more h6 getting turbocharged. You said 0.8 psi only? The harness near the turbo is just annoying, the water-tanssy oil cooler as well.
Thanks for sharing dude
sorry friends for harness, I can't find a problem with knock sensor, and this is a position which works... i'll fix every thing!!!
what means "water-tanssy oil cooler" and why it annoying???
my boost is 0.5bar (0.72 psi) peak 0.55 (0.8 psi), I inject methanol to prevent detonation. Russian fuel is CRAP! and detons from 0.2bar on the same settings.
i'll try to share some more pics...
p.s. i like critics and good advices how to increase perfomance !!
saffarco wrote:Are you using stock maf housing size? The stock maf housing is 2.75" IIRC, which gives a limitation to engine power. I believe no way through to get more power except if you changed the diameter of the housing, Don't know which size would be better tho, maybe 2.8-3.0"
No map sensor? No FPR? These I would say better to have but, it's your setup and if it works well so be it.
Trust oil cooler? Very interested to know the idle and high RPM pressure readings cause I'm using the same actually. Haven't read the pressure yet. FYI, idle pressure reading should be 20psi or above at 600rpm, and 73psi or above at 5500rpm or above. both at engine oil temp of 80 C or 176 F. Any value below these figures could result in less life of engine components.
Oil catch can? basically two outlets should be connected to it, the one in the left head and the PCV valve. However, I don't know really what consequences would connecting the PCV valve have.
Thanks for pics, we're waiting for the winter here since long
P.3 wrote:Small cooler is for for steering pump.
About trust.... crap....fitings leaking.... about pressure I dont know))))
When I start, my stock MAP shows just 0.35 bar (5.1 psi), I change it to MAP from 2.5 turbo legacy gt.
My stock MAF is the same as STI, and it works perfectly.
Yes, no fuel pressure regulator. Just stock tuned allways 100% .... I will make new fuel lines with normal frp.
Oil catcher...is it usefull stuff?
P.3 wrote:my rebuilding krasner.ai
Return to 3.0R & 3.6R engine specific
Users browsing this forum: No registered users and 14 guests