Page 1 of 1
Supercharged 3.0R
Posted:
Thu Jan 17, 2008 4:36 pmby ChrisGT
Not sure if this has been posted before, this is an interesting Legacy running a supercharger on the 3.0R. According to the specs 308HP/39kg torque. I think it is back to AWD, but has been RWD and drifted previously. It still had most of its interior so as a drifter it was probably a bit too heavy. Cost(I think) is around $10K for parts only, but my Japanese is pretty hopeless.[/img]
Enjoy
Posted:
Thu Jan 17, 2008 10:23 pmby deucer
Now wouldn't THAT be SWEET! I'm hopeful that Subaru will go down the path of super or turbo charging the 3.0R some day soon. It would be a sensational point of difference over their European rivals (the likes of BMW & Audi).... might even make the GT a cheaper alternative! Because a force fed flat six would clearly be the flagship model!
Cheers,
Deucer.
Posted:
Fri Jan 18, 2008 9:14 amby Spec B Wgn
I want one....now
Posted:
Fri Jan 18, 2008 9:42 amby tangcla
deucer wrote:Because a force fed flat six would clearly be the flagship model!
Screw you hippy! GT for the flagship position!
haha
Posted:
Mon Jan 21, 2008 11:05 pmby deucer
haha! That was too easy!
Posted:
Tue Jan 22, 2008 12:59 pmby Akwoo
this supercharger been out for awhile now,
seen it on a few cars in Japan.
Posted:
Tue Jan 22, 2008 1:27 pmby tangcla
I dunno about the burgundy coloured manifolds...
Posted:
Tue Jan 22, 2008 4:59 pmby markii
me too, i was hoping for sti pink
Posted:
Tue Jan 22, 2008 11:54 pmby deucer
Anyone know what the stats are for these supercharged 3.0R's? kW? Nm?
Deucer.
Posted:
Wed Jan 23, 2008 6:08 amby Why
I dont care what colour it is as long as I can have one
Posted:
Mon May 05, 2008 8:57 pmby MH3.0R
Hey Alan,
You must have the contacts to find out more about the Superchanged 3.0R. I saw elsewhere some say the kit of parts is about 10 KAUD, then shipping, fitting, tuning, etc. Any further details on the kit and process?
Kind Regards,
Mark.
Posted:
Wed Sep 24, 2008 12:40 amby PHAT GT
MH3.0R wrote:Hey Alan,
You must have the contacts to find out more about the Superchanged 3.0R. I saw elsewhere some say the kit of parts is about 10 KAUD, then shipping, fitting, tuning, etc. Any further details on the kit and process?
Kind Regards,
Mark.
Hey Mark
the above pic was only the test unit they have now finished the final product and comes all cast aloy now (very SEXY)
i have pics of the new kit i took while in japan earler this year ,ill find them and post them up
Michael
Posted:
Thu Sep 25, 2008 9:46 amby MIB
I did have a chat to Rotax I think it is, in Perth, about doing a supercharger on a 3.0, they said it all depended on how much power you wanted but typically a complete drop off, fit test, drive out would be 15k. The development guy there said about 270kw would be realistic without opening the engine up. Not to bad considering the resale of a 3.0 at the moment...
Posted:
Fri Oct 17, 2008 8:56 pmby MH3.0R
Guys,
I am interested in any pictures of the finished product/kit and if you can provide any details of a local oz supercharger 3.0R.
Any one know what torque peak value is created and the rating of the torque converter in the AT5?
Mark.
Posted:
Sat Oct 18, 2008 12:40 amby WhiteGTB
Mark, if what you want becomes reality.... I think you would set the bench mark for many Libs in Oz
Geezzz.... 3.0R Supercharged would be da bomb