oversize cams
Posted: Sun Jul 01, 2012 4:33 amjust wondering if any1 hav or kno if there are any oversize cams for the h6?
cheers
Jamie
cheers
Jamie
Page 1 of 1
Posted: Sun Jul 01, 2012 4:33 amRe: oversize cams
Posted: Sun Jul 01, 2012 7:02 amI believe Delta Cams can make you customs ones (expen$ive). I have not seen production versions for H6 cams.
Re: oversize cams
Posted: Mon Jul 02, 2012 11:44 amthat's what the AVCS is for.....!!
Re: oversize cams
Posted: Mon Jul 02, 2012 1:30 pmi dont think avcs can make the valves open longer
and thats whats oversized cams are for lol xP
and thats whats oversized cams are for lol xP
Re: oversize cams
Posted: Mon Jul 02, 2012 2:56 pmnope,
but combine AVCS on both the intake and exhaust cams
then add the VVL system into the mix and you can achieve just about anything you wish
remembering the natural power / torque zones that the engine has can either combine with the cams and their control systems to boost power, but it can also cause you to lose big wads of power if applies incorrectly.
and the same applies to swapping cams. unless your car will only ever be used at one small rpm range.
Tim (tradewind) had documented huge power differences from small changes to his EZ30 exhaust headers.
one set gave a large power increase in the high rpm zone, but killed the midrange torque.
wonder if there's an adaptor so I can throw on a 650 Holley and get rid of those pesky injectors....
but combine AVCS on both the intake and exhaust cams
then add the VVL system into the mix and you can achieve just about anything you wish
remembering the natural power / torque zones that the engine has can either combine with the cams and their control systems to boost power, but it can also cause you to lose big wads of power if applies incorrectly.
and the same applies to swapping cams. unless your car will only ever be used at one small rpm range.
Tim (tradewind) had documented huge power differences from small changes to his EZ30 exhaust headers.
one set gave a large power increase in the high rpm zone, but killed the midrange torque.
wonder if there's an adaptor so I can throw on a 650 Holley and get rid of those pesky injectors....
Re: oversize cams
Posted: Mon Jul 02, 2012 4:26 pmstock cams good for 420kw atw. Whens your 140mph liberty going to be done? build thread!
Re: oversize cams
Posted: Mon Jul 02, 2012 5:32 pmkiks wrote:stock cams good for 420kw atw. Whens your 140mph liberty going to be done? build thread!
Re: oversize cams
Posted: Tue Jul 03, 2012 7:33 pmGripped wrote:i dont think avcs can make the valves open longer
and thats whats oversized cams are for lol xP
They dont need to open longer, they already can achieve a full cylinder fill for 100% V.E(even more than 100% with the right settings!)
Re: oversize cams
Posted: Tue Jul 03, 2012 7:45 pmRobbks wrote:that's what the AVCS is for.....!!
Exactly and spot on response from KiDo as well