club.liberty.asn.au

hey guys,
currently own a stock my06 Subaru liberty 3.0R-B. and looking to get a cold intake system?
would be helpful to see what all the other 3.0R-B people are using?
i hear the HKS panel filter maybe a good move.

hot air intake by garrett is fairly good. Anything else is a waste of time.

i have a 2" i think it is pipe running up from near the foglight and built a stainless pipe from airbox to the throttle body,

it seems to have helped dont have any real figures other than just feel :S hahah

Brad88 wrote:i have a 2" i think it is pipe running up from near the foglight and built a stainless pipe from airbox to the throttle body,

it seems to have helped dont have any real figures other than just feel :S hahah

Do you have a pic of the intake ?

[img]<a%20href="http://s253.photobucket.com/albums/hh76/buzz_something/?action=view&amp;current=IMG_0005.jpg"%20target="_blank"><img%20src="http://i253.photobucket.com/albums/hh76/buzz_something/IMG_0005.jpg"%20border="0"%20alt="Photobucket"></a>[/img]

[img]<a%20href="http://s253.photobucket.com/albums/hh76/buzz_something/?action=view&amp;current=IMG_0006.jpg"%20target="_blank"><img%20src="http://i253.photobucket.com/albums/hh76/buzz_something/IMG_0006.jpg"%20border="0"%20alt="Photobucket"></a>[/img]

this is the first time i have tried to post pics so im not sure if it will work :S

i dont have one of the pipe from the fog light area but it was just 2" pvc pipe from bunnings hahaha

i think i used one or maybe two 90 degree bends and a 45 and some straight of course then i used a 2" to 2.5" (i think it was) reducer and taped up the outside to fit the hole where the resonator used to be.

Here you go:

cheers mate, how did you post them hahah??

[img ] http://www.image.com/image.jpg [/img ]

Also don't use imageshack because it's shit.
Try www.imgur.com

ok cheers mate

Brad, any difference in throttle response (better or worse) without the chamber in there

Don;t want to build a few of them do you..?

personally i think it has made a huge difference,

it does get a little hot (the pipe) but still i think it was one of the best things iv done, and plus you can hear the engine growl after about 5000rpm or so

on making more, im not too sure i was considering it but i dont have a tig of my own, i borrowed a mates and i dont think he would be to happy if i keep borrowing his and using all his gas hahah

but it could be a possibility, i would need a decent amount of people to buy them but

Look great although, wouldn't it be better out of silicone as that metal would conduct alot of heat?

yeh it wouldn't conduct heat if it was made out of silicone but it would of been to hard to get one made because i would have had to get it custom,so i just went and bought the stainless for this and welded it up.

hamish_023 wrote:Look great although, wouldn't it be better out of silicone as that metal would conduct alot of heat?

not really an issue.
the air moves damn quick through the pipe and has little time to transferr heat, especially with smooth internal walls.

the stock rubber pipe would get just as hot