Flat6Estate wrote:All that extra torque must have come from the fact that you have a supercharged H8 engine.
What did the extra 2 cylinder mod cost you?
Hahahahhahaha
Flat6Estate wrote:All that extra torque must have come from the fact that you have a supercharged H8 engine.
What did the extra 2 cylinder mod cost you?
Swipez wrote:That's relatively conservative for an E85 power figure Cliffo, Engine much be loving you, it would be very healthy I imagine. And yeah lol, E85 is literally 3 min drive from my house.
HardwareBoB wrote:Swipez wrote:That's relatively conservative for an E85 power figure Cliffo, Engine much be loving you, it would be very healthy I imagine. And yeah lol, E85 is literally 3 min drive from my house.
Is it? Where are all the others making more?
dr20t wrote:No way in hell an unopened, supercharged h6 is getting to 230awkw on 98 with 9psi. With the same logic (assuming you're not knock limited which you absolutely are on 98), it would be reasonable to assume you can make 270-280awkw at the same 9psi boost on e85. Haven't seen that happen and don't believe I will.
Mick
PUDZ RSC3.0RB wrote:dr20t wrote:No way in hell an unopened, supercharged h6 is getting to 230awkw on 98 with 9psi. With the same logic (assuming you're not knock limited which you absolutely are on 98), it would be reasonable to assume you can make 270-280awkw at the same 9psi boost on e85. Haven't seen that happen and don't believe I will.
Mick
Hey Mick, what about Gino's.
MY06 3rspecb manual sedan, Urban Grey- Raptor Intercooled S/C - air cooled, billet impeller, 9psi, 230kwatw P98 - Vin @ Got It Rex.
HardwareBoB wrote:Swipez wrote:That's relatively conservative for an E85 power figure Cliffo, Engine much be loving you, it would be very healthy I imagine. And yeah lol, E85 is literally 3 min drive from my house.
Is it? Where are all the others making more?
alexeiwoody wrote:Mark's Velocci Lib with the same S/c setup as Gino (IIRC) - made 175kwatw. Add another 20kw for a manual - and it'd have 195kwatw. Is there such a big difference at the engine in reality? Absolutely not.
You can't compare different dynos. You'd just be wasting your time. That's why 1/4 is the best comparison.
Hopefully this message gets through to people eventually.
dr20t wrote:My bad
Sorry guys I don't know what I'm talking about and obviously don't know enough about how amazing the h6 really must be.
330awkw seems logical and realistic from 15psi on an unopened 3.0 litre on 98.
Return to 3.0R & 3.6R engine specific
Users browsing this forum: Google [Bot] and 2 guests