Anyone got an Apexi / HKS panel filter in their 3.0??

Posts specific to the 3.0 litre NA H6 engine

Anyone got an Apexi / HKS panel filter in their 3.0??

Postby nico » Thu Nov 13, 2008 3:46 pm

Now I know a bunch of you have bought the HKS panel from PhatGT, so was hoping to et some feedback. Looks like it could be a good, cheap 1st mod but wanted to know whether people thought it was worthwhile as it doesn't matter how cheap a mod is if there's no improvement...

Any noticable difference?
Induction noise?
Which is better - HKS or Apexi (assuming someone has tried both)

Cheers!
User avatar
nico
 
Posts: 94
Joined: Sun Nov 02, 2008 7:53 pm
Location: Inner West, Sydney
Car: MY07 3.0R Spec B Wags 6mt

Postby alcapone26 » Fri Nov 14, 2008 12:42 pm

Yes got a HKS 10 months ago.
Marginable noticable difference (Placebo effect?).
Sounds a little different.
Good easy 1st mod, along with the Prova air guide.
Allan

MY06 Subaru Liberty 3.0R Spec.B
(Violet Grey)
alcapone26
 
Posts: 54
Joined: Wed Dec 26, 2007 1:10 pm
Location: Wollongong

Postby Arith » Fri Nov 14, 2008 12:56 pm

You probably won't notice any difference whatsoever in terms of performance. It's too marginal. As alcapone26 said, there is a bit more induction noise (slight). HKS and Apexi pretty much same same. However in the overall grand scheme of things, it will chip in better than stock if you're doing other mods like the dump pipe, exhaust, top mount, etc.

[ Former Liberty ... Slightly Modified -> Click
here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim


Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 7 guests