whats the oil pressure for ez30r

Posts specific to the 3.0 litre NA H6 engine

whats the oil pressure for ez30r

Postby mwboom » Fri Apr 02, 2010 6:23 pm

Hi can anyone answer the question?
thanks
mwboom
 
Posts: 37
Joined: Tue Mar 09, 2010 7:28 am
Location: Sydney
Car: 2005 Liberty 3.0rbTT
Real name: Mark

Re: whats the oil pressure for ez30r

Postby teK-- » Fri Apr 02, 2010 6:56 pm

OIL PRESSURE (at oil temperature of 80°C (176°F)):

Standard: 135 kPa (1.4 kg/cm2, 20 psi) or more (at 600 rpm)

500 kPa (5.1 kg/cm2, 73 psi) or more (at 5,000 rpm)
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
User avatar
teK--
-stickered-
 
Posts: 4063
Joined: Thu Jun 11, 2009 5:02 pm
Location: Melbourne

Re: whats the oil pressure for ez30r

Postby mwboom » Fri Apr 02, 2010 8:23 pm

Thanks Jim.
Is that Subaru verified? or where is that referenced?
thanks Mark
mwboom
 
Posts: 37
Joined: Tue Mar 09, 2010 7:28 am
Location: Sydney
Car: 2005 Liberty 3.0rbTT
Real name: Mark

Re: whats the oil pressure for ez30r

Postby teK-- » Fri Apr 02, 2010 8:47 pm

It's from the Subaru workshop manual for the EZ30
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
User avatar
teK--
-stickered-
 
Posts: 4063
Joined: Thu Jun 11, 2009 5:02 pm
Location: Melbourne

Re: whats the oil pressure for ez30r

Postby mwboom » Fri Apr 02, 2010 9:10 pm

Cheers
mwboom
 
Posts: 37
Joined: Tue Mar 09, 2010 7:28 am
Location: Sydney
Car: 2005 Liberty 3.0rbTT
Real name: Mark

Re: whats the oil pressure for ez30r

Postby teK-- » Sat Apr 03, 2010 3:49 pm

Don't forget that those figures are absolute MINIMUM required to safely operate the engine. Realistically you should be getting at least 20-30% more in real world use so that there is a safety margin. Any less than that and you are running your oil too hot or oil viscosity choice is too low.
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
User avatar
teK--
-stickered-
 
Posts: 4063
Joined: Thu Jun 11, 2009 5:02 pm
Location: Melbourne


Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 3 guests