EGR removal for postface Gen 4

Posts specific to the 2.5 litre NA engine

EGR removal for postface Gen 4

Postby Jaffer » Tue Mar 08, 2022 6:43 am

Hi guys,
Just looking for advice on the best way to remove EGR from my 2008 Gen 4 engine.
My car is a 2004 pre face lib, and so does not have EGR from factory, however the engine has gone and so I am replacing it. I am aware that the later model has a different intake Setup, so I will be swapping the original from the car onto it. This still leaves the egr pipe coming out of the passenger side head. Just looking for advice on whether that can be blanked off or rerouted to suit the earlier car
Jaffer
 
Posts: 1
Joined: Mon Mar 07, 2022 7:37 pm

Re: EGR removal for postface Gen 4

Postby bigBADbenny » Tue Mar 08, 2022 8:45 pm

I’d say fabricate a blank plate, if there isn’t a delete kit available.

Otherwise a welsh plug aka freeze/galley plug may fit if the port is circular.
User avatar
bigBADbenny
 
Posts: 10146
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop


Return to 2.5i engine specific

Who is online

Users browsing this forum: No registered users and 1 guest