Gear box leak

Posts specific to the 2.5 litre NA engine

Gear box leak

Postby Le3e » Sat Apr 09, 2016 5:49 pm

I've recently changed out my clutch disengage fork, as it snapped.

I've noticed a leak coming from the gear box where the front RHS axle goes in.

My question is in a 2008 Liberty 2.5i 5sp Man gearbox, are the left and right front shaft seals the same. From memory they were different when I last had to replace on but I'm being told they are the same part for both sides.
Le3e
 
Posts: 1
Joined: Sat Apr 09, 2016 5:42 pm
Car: 2008 Liberty

Re: Gear box leak

Postby bigBADbenny » Wed Apr 13, 2016 7:23 pm

Confirmed its not the cv boot?
Same part each side on the 6mt, use the opposed forces link in my sig to check for 2.5i...
http://opposedforces.com/parts/legacy/e ... tration_3/
If it's seal baffle plate etc, would be same for L&R
User avatar
bigBADbenny
 
Posts: 10420
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop


Return to 2.5i engine specific

Who is online

Users browsing this forum: No registered users and 3 guests