Page 1 of 1

Help with part identification

PostPosted: Wed Nov 04, 2015 10:07 am
by 2OFUS
Hi guys
Can anyone tell me what the part is that's located behind the engjne oil dipstick ?
2007 2.5i sedan
It attaches just below the intake manifold and has a spinning thing on the end (that goes into the motor)
The photos I have are to big to upload

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 10:07 am
by 2OFUS
Sorry about the poor description lol

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 11:44 am
by HardwareBoB
Air pump

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 12:23 pm
by BillyCorgi
Heaven forbid, you are not asking about the oil fill cap are you? LOL
http://imgur.com/14RwYKC

(did not think that the 2.5i engine had a secondary airpump?)

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 1:12 pm
by 2OFUS
Nah not the air pump
And lol definately not the oil filler neck lol

Can I Mms it to some one plz ?
0405772997

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 1:22 pm
by BillyCorgi
Post it up on Imgur and post the link?
http://imgur.com/

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 6:48 pm
by KiDo_Tuning
2OFUS wrote:Hi guys
Can anyone tell me what the part is that's located behind the engjne oil dipstick ?
2007 2.5i sedan
It attaches just below the intake manifold and has a spinning thing on the end (that goes into the motor)
The photos I have are to big to upload


Sounds like the TGV system

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 7:49 pm
by 2OFUS
That's the one :)

How do I set it.

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 8:25 pm
by KiDo_Tuning
2OFUS wrote:That's the one :)

How do I set it.


Manually set to the closed position. Move the TGV motor so it can hook onto the wheel. Apply power

Re: Help with part identification

PostPosted: Wed Nov 04, 2015 9:26 pm
by 2OFUS
Thank you :)