Heya all first newbie post
I have been reading the posts regarding the NA 2.5L motor in anticipation of receiving my new toy which is a Brumby with the 2000 RX Liberty engine and complete driveline including brakes the lot. All fully engineered and road legal.
It was a purchase off eBay and I await impatiently for it to arrive from Canberra. Scheduled to arrive on the 20th
Weighing in at a total of 1050kg the 2.5L should be adequate although having said that I have had my eye on that "blown" thread.
Currently trawling looking for improved output improvements to the engine any suggestions.
Peter
Australian Liberty Owners Club
newbie post
6 posts
• Page 1 of 1
newbie post
by ozbrumby » Tue Oct 08, 2013 8:19 pm
- ozbrumby
- Posts: 12
- Joined: Fri Oct 04, 2013 7:22 pm
- Car: Brumby with 2.5 driveline
Re: newbie post
by alessandro132 » Tue Oct 08, 2013 8:20 pm
Very nice, keen to see some pics once it arrives
TEAM TOYOTA | TEAM HKS
Cusco, HPI, HKS, and a few other bits...
Cusco, HPI, HKS, and a few other bits...
-
alessandro132 - -stickered-
- Posts: 2380
- Joined: Wed Mar 21, 2012 8:40 am
- Location: Sydney
- Car: 2000 JZX100 Toyota Chaser Tourer V
- Real name: Al
- Profile URL: viewtopic.php?f=10&t=16914
Re: newbie post
by blademaster » Wed Oct 09, 2013 1:27 pm
Welcome
heheheheeheh =)
ozbrumby wrote:.... I have had my eye on that "blown" thread.
heheheheeheh =)
2004 Black 2.5 Supercharged Liberty Sedan
2006 Blue 3.0R-B Liberty Wagon
1998 Silver 2.5 Bilstein Edition Liberty Sedan
1998 Dark Blue 2.5 Liberty Wagon
1994 White 1.3 Suzuki Swift Sedan
1998 Light Blue 2.6 Turbo Diesel Land Rover Discovery Tank
2006 Blue 3.0R-B Liberty Wagon
1998 Silver 2.5 Bilstein Edition Liberty Sedan
1998 Dark Blue 2.5 Liberty Wagon
1994 White 1.3 Suzuki Swift Sedan
1998 Light Blue 2.6 Turbo Diesel Land Rover Discovery Tank
-
blademaster - Posts: 402
- Joined: Sat Nov 08, 2008 10:26 am
- Location: Perth, WA
- Car: 2004 Liberty 2.5S, Black
- Real name: Fudz
Re: newbie post
by ozbrumby » Wed Oct 09, 2013 9:06 pm
And why wouldn't you chuckle...you could be turbo'd but like you I would rather be blown hehehe
blademaster wrote:Welcomeozbrumby wrote:.... I have had my eye on that "blown" thread.
heheheheeheh =)
- ozbrumby
- Posts: 12
- Joined: Fri Oct 04, 2013 7:22 pm
- Car: Brumby with 2.5 driveline
-
bigBADbenny - Posts: 10420
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: newbie post
by ozbrumby » Fri Oct 18, 2013 9:27 pm
It arrived today and I am crowing like a rooster.
Bit noisy in 1st gear but will look at the oil and change it out with an additive
No crunching or noises in any other gear just 1st and it is a very direct shift so I might get lucky with an oil flush and additive.
Any way I am rapt.
peter
Bit noisy in 1st gear but will look at the oil and change it out with an additive
No crunching or noises in any other gear just 1st and it is a very direct shift so I might get lucky with an oil flush and additive.
Any way I am rapt.
peter
- ozbrumby
- Posts: 12
- Joined: Fri Oct 04, 2013 7:22 pm
- Car: Brumby with 2.5 driveline
6 posts
• Page 1 of 1
Return to 2.5i engine specific
Who is online
Users browsing this forum: No registered users and 3 guests