Looking for air intake kit for 2.5i

by **tommylee8855** » Thu Mar 27, 2008 10:32 pm

Hey guys, i am strucked with many kit that is totally for the GT. But as far as i went i could not find any bolt on kit for the 2.5i(07'~). You guys got any recommendation that is bolt on?

thanks

by **sinist4** » Thu Mar 27, 2008 10:40 pm

there is a blitz induction cover, bolt on.

by **EJ25** » Fri Mar 28, 2008 7:42 am

there isnt any cai for the 2.5 lib, but i think there is a cai for the 2.5 impreza rs which should be similar..

by **overl0ad** » Fri Mar 28, 2008 12:29 pm

different.

one runs MAF, the other runs MAP sensor

u can use the piping, then bolt onto a HKS intake kit for the GT.

by **overl0ad** » Fri Mar 28, 2008 12:32 pm

sorry, the above post is only for the Gen IV.

if you have a gen III, the RS intake kit will work

by **overl0ad** » Fri Mar 28, 2008 10:13 pm

one of the few intakes specific for the Gen IV NA.

http://weapon-r.com/english/index.php?m ... sao6ra8mp5

there's a few more out there which i found when i was doing research for my car, but i'm too lazy to find the links right now.

edit: i've asked them in the past if this will work with right hand drive cars as the americans use left hand drive. they infomred me that they have sold several of these kits to the UK and have had no issues.

ebay link here. edited to make post shorter

by **tommylee8855** » Sat Mar 29, 2008 12:27 am

Thanks for the suggestion. Have any of the members in the forum tried the filter? I have my eye on the Ram Air kit, hopefully i can find a local dealer that carries them. The instructions guide provided most information needed to install it.

by **overl0ad** » Sat Mar 29, 2008 4:42 pm

my guess would be "no"

most of the traders here focus on the JDM parts. which mainly cater for the GT.

the NA parts only really come out of the US. like cams and stuff. which no one to my knowledge here does.

my brother is in the US and i can't be bothered getting parts out of the US....

by **tommylee8855** » Sun Mar 30, 2008 8:29 pm

Yeah, you are right. Thanks for the information. I'm planning to order via eBay. Can't wait to try it out.

by **silo's_sube** » Wed May 07, 2008 1:01 am

has anyone bought this yet for their n/a. if so could you post up some about the affects it has made. also does it make a huge noise difference in the engine bay?
post a sound clip maybe??

thanks guys

by **tommylee8855** » Thu May 08, 2008 12:36 am

silo's_sube wrote:has anyone bought this yet for their n/a. if so could you post up some about the affects it has made. also does it make a huge noise difference in the engine bay?
post a sound clip maybe??

thanks guys

I had it installed but the pipe does not suit MY07 2.5, so I brought another piping set for it. The intake does not give any extra power to the car but only some extra noise.

Click the link below to hear the engine noise
http://www.youtube.com/watch?v=3ATX-Tqd ... 795&st=125

Cheers

by **LT5PLA** » Thu May 08, 2008 11:37 am

i just removed the resonator on mine.... makes the induction sound more beefier... i think also helped with throttle response to

by **drndrn** » Thu May 08, 2008 2:12 pm

i just removed mine today.. but.. put it back on, scared of warranty issues.

it would void my warranty right?

by **sinist4** » Thu May 08, 2008 8:04 pm

drndrn wrote:i just removed mine today.. but.. put it back on, scared of warranty issues.

it would void my warranty right?

nah not really.

by **Arith** » Thu May 08, 2008 9:32 pm

drndrn wrote:i just removed mine today.. but.. put it back on, scared of warranty issues. it would void my warranty right?

I agree with sinist4. Naw, it won't void anything. I put it equivalent to removing your engine cover. Doesn't effect the drivetrain, suspension, etc.

Looking for air intake kit for 2.5i

Looking for air intake kit for 2.5i

Who is online