Does EJ25 Impreza engine fit in Liberty?

Posts specific to the 2.5 litre NA engine

Does EJ25 Impreza engine fit in Liberty?

Postby rubenastley » Tue Jul 09, 2013 1:36 pm

Hey guys,

My EJ25 in the 2000 liberty has cacked itself... Does anyone know if a EJ25 from an impreza will fit the liberty?

Thanks
rubenastley
 
Posts: 7
Joined: Sat Jun 01, 2013 10:16 pm
Car: 1999 Liberty RX Wagon

Re: Does EJ25 Impreza engine fit in Liberty?

Postby Robbks » Tue Jul 09, 2013 2:00 pm

Generally yes.

It's the differences in inlet manifolds, engine sensors, etc that can cause hassles.

Which year Impreza EJ25 are you looking at fitting
coyote wrote:Sure, a GTR is fast ... but it's about as interesting as listening to grass grow.
User avatar
Robbks
 
Posts: 2185
Joined: Wed Jan 05, 2011 8:21 am
Location: Hobart, Tas
Car: MY06 3.0RB Wagon
Real name: Rob
Profile URL: viewtopic.php?f=10&t=12350

Re: Does EJ25 Impreza engine fit in Liberty?

Postby rubenastley » Wed Jul 10, 2013 1:16 pm

no specific impreza engine atm but assuming it will be around the 1999 era?, just looking at my options

I called a few places, and they are requesting i find out the amount of cams my car needs?

Its a 1999 Gen 3 liberty RX wagon, i can't seem to find conclusive information into which exact engine would be a direct swap?
rubenastley
 
Posts: 7
Joined: Sat Jun 01, 2013 10:16 pm
Car: 1999 Liberty RX Wagon

Re: Does EJ25 Impreza engine fit in Liberty?

Postby Robbks » Wed Jul 10, 2013 1:47 pm

1999 Gen3 RX had the 2.5 Litre SOHC engine. (Twin Cam, one cam on each bank)

the earlier Gen2 2.5 RX had DOHC (Quad Cam, two cams on each bank)
coyote wrote:Sure, a GTR is fast ... but it's about as interesting as listening to grass grow.
User avatar
Robbks
 
Posts: 2185
Joined: Wed Jan 05, 2011 8:21 am
Location: Hobart, Tas
Car: MY06 3.0RB Wagon
Real name: Rob
Profile URL: viewtopic.php?f=10&t=12350

Re: Does EJ25 Impreza engine fit in Liberty?

Postby rubenastley » Mon Jul 15, 2013 5:08 pm

Sorry to be a big pain in the butt,

But will a 2005 Subaru Liberty Gen 4 engine fit in a 2000 Gen 3 liberty?

Particularly http://www.ebay.com.au/itm/SUBARU-LIBER ... 35c68e1dc4

According to the internet, the Gen 3 Liberty ran a EJ251 and the 2005 4th gen is running EJ252. Are these engines completely interchangeable? The EJ252 i'm looking at doesn't come with accessories so... will it be a pain in the backside to install it into a car that comes stock with a EJ251?
rubenastley
 
Posts: 7
Joined: Sat Jun 01, 2013 10:16 pm
Car: 1999 Liberty RX Wagon

Re: Does EJ25 Impreza engine fit in Liberty?

Postby blademaster » Wed Jul 17, 2013 2:29 am

Hey dude, probs best to ask your local suby expert. Which state are you in? Based on your state someone could recommend a workshop that could answer that question for you. The ebay item is in Victoria, and it says pick up only, so I going to have a stab and say you are in Vic (meaning I can't help with Vic workshops as I am in WA).

However, in my PERSONAL non-expert opinion, it will be a pain to get an EJ252 to go into a car that previously had an EJ251. They made quite a few changes from 251 to 252 (eg electronic throttle).

I'd still say talk to a forum-approved workshop, maybe they can source you a motor from somewhere (or get a new turbo motor! or get a new SOHC motor and supercharge it! or get a H6! or get a V12!!)
2004 Black 2.5 Supercharged Liberty Sedan
2006 Blue 3.0R-B Liberty Wagon
1998 Silver 2.5 Bilstein Edition Liberty Sedan
1998 Dark Blue 2.5 Liberty Wagon
1994 White 1.3 Suzuki Swift Sedan
1998 Light Blue 2.6 Turbo Diesel Land Rover Discovery Tank
User avatar
blademaster
 
Posts: 402
Joined: Sat Nov 08, 2008 10:26 am
Location: Perth, WA
Car: 2004 Liberty 2.5S, Black
Real name: Fudz


Return to 2.5i engine specific

Who is online

Users browsing this forum: No registered users and 2 guests