Accessing the oil filter in MY07

Posts specific to the 2.5 litre NA engine

Accessing the oil filter in MY07

Postby Coops75 » Sun Nov 18, 2012 9:05 am

I'm half way through changing the oil in my 07 and cannot for the life of me work out how to access the filter. The manual says to take off a plate IOT get to the filter but my car doesn't have said plate. Do I have to take off the entire plastic splash protection plate?
Coops75
 
Posts: 47
Joined: Wed Oct 31, 2012 5:27 pm
Location: Canberra
Car: MY07 2.5i

Re: Accessing the oil filter in MY07

Postby 05GTLIB » Sun Nov 18, 2012 9:38 am

Yes, well assuming yours is the same as mine, that splash gaurd needs to be removed, it is held by 3 bolts on the bottom and a clip on each side in the wheel well
User avatar
05GTLIB
 
Posts: 363
Joined: Sun Oct 30, 2011 5:59 pm
Location: Perth, W.A
Car: 05 liberty gt
Real name: Tom

Re: Accessing the oil filter in MY07

Postby Coops75 » Sun Nov 18, 2012 10:09 am

Thanks.
Coops75
 
Posts: 47
Joined: Wed Oct 31, 2012 5:27 pm
Location: Canberra
Car: MY07 2.5i

Re: Accessing the oil filter in MY07

Postby HyRax » Sun Nov 18, 2012 10:39 am

05GTLIB wrote:Yes, well assuming yours is the same as mine, that splash gaurd needs to be removed, it is held by 3 bolts on the bottom and a clip on each side in the wheel well

Yes, it's the same.
I was going to procrastinate, but I put it off...
User avatar
HyRax
 
Posts: 1202
Joined: Sat Jul 30, 2011 12:25 am
Location: Sydney
Car: ADM MY19 3.6R Outback
Real name: Jeff
Profile URL: viewtopic.php?f=10&t=15482


Return to 2.5i engine specific

Who is online

Users browsing this forum: No registered users and 1 guest