Hi
This 04 prem wagon after a flat battery and charge,
Shows "Er IU" above the odometer and it won't go away, clear it with odo reading and it's back on restart.
Also Cruise Control won't operate. Fuses OK.
Plugged into mates analyser, DTC shows B1100 INTEG. UNIT SYSTEM ERROR THE PA....ST
Cannot clear this.
Any thoughts!
Australian Liberty Owners Club
Er IU and DTC B1100 INTEG.
3 posts
• Page 1 of 1
Er IU and DTC B1100 INTEG.
by jarno_au » Sat Mar 03, 2012 1:52 pm
MY04 2.5i Premium Auto Wagon Black
- jarno_au
- Posts: 14
- Joined: Thu Aug 14, 2008 9:36 am
- Location: Melb
Re: Er IU and DTC B1100 INTEG.
by garbo41610 » Sat Mar 03, 2012 3:21 pm
Are you sure the error code is B1100? I have found some info on Subaru OBDII errors that show P1100 Starter Switch Circuit Malfunction...
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: Er IU and DTC B1100 INTEG.
by jarno_au » Sat Mar 03, 2012 7:42 pm
Hi, yes B1100 etc
took a photo of the readout.
I saw the P error codes the in manual too, all start in P.
took a photo of the readout.
I saw the P error codes the in manual too, all start in P.
MY04 2.5i Premium Auto Wagon Black
- jarno_au
- Posts: 14
- Joined: Thu Aug 14, 2008 9:36 am
- Location: Melb
3 posts
• Page 1 of 1
Return to 2.5i engine specific
Who is online
Users browsing this forum: No registered users and 5 guests