Where to spray Upper Cylinder Cleaner

Posts specific to the 2.0 litre NA engine

Where to spray Upper Cylinder Cleaner

Postby deeps » Wed Feb 24, 2010 10:10 pm

Can someone tell me where to spray the Subaru upper cylinder cleaner in the 2.0R?

I think i wasted a can today
Attachments
4.jpg
4.jpg (147.14 KiB) Viewed 2944 times
3.jpg
3.jpg (171.09 KiB) Viewed 2944 times
2.jpg
2.jpg (155.47 KiB) Viewed 2944 times
1.jpg
1.jpg (180.32 KiB) Viewed 2945 times
deeps
 
Posts: 86
Joined: Fri Jul 17, 2009 12:35 am
Location: Perth
Car: Subaru Liberty MY07 2.0R

Re: Where to spray Upper Cylinder Cleaner

Postby livingdeadbeat » Wed Mar 03, 2010 6:33 pm

if you look in that last picture, do you see the Red rubber cover over the alternator wire? right behind that there is a hose which goes into the manifold. just unplug that hose, and spray it in there.
livingdeadbeat
 
Posts: 30
Joined: Sat Dec 09, 2006 4:31 pm

Re: Where to spray Upper Cylinder Cleaner

Postby conormosh » Tue Jul 27, 2010 1:26 am

I think you can spray like that through the engine is off Sinh, and really clean the throttle / + s to leave for 5-10 minutes to evaporate all. Remember this is an aerosal jet fuel at least 20 cm from the battery. Danger, if the motor is running. The high power filter cleans all incoming calls and heads, bored, etc.
conormosh
 
Posts: 4
Joined: Mon Jul 26, 2010 10:32 pm
Car: 2007 Ford Focus
Real name: conor

Re: Where to spray Upper Cylinder Cleaner

Postby castek » Mon Aug 23, 2010 8:08 am

I'm pretty sure when i used the UEC, i sprayed in half the can, you let it soak in, then start the car and spray the rest. It helps having two people as the car will want to stall, so one to spray and one to keep revs up

you'll know if it worked too, my car chucked loads of smoke from the exhaust
castek
 
Posts: 634
Joined: Thu Feb 25, 2010 6:34 am
Location: Melbourne (Altona)
Car: 2005 Liberty 2.5i Arctic White
Real name: John

Re: Where to spray Upper Cylinder Cleaner

Postby sheppo9 » Mon Aug 23, 2010 1:36 pm

Take of the "Torque Box" up near the throttle body (3 PCV type hoses, 2 bolts, 2 hose clamps) and spray it straight into the throttle body.
You'll have to hold the T.B open with something (a big screw driver wrapped in a rag works wells) due to the electronic T.B.
Leave it for 5 - 10 mins, basically as long as it takes you to put it back together.
User avatar
sheppo9
 
Posts: 552
Joined: Mon Aug 25, 2008 12:44 pm
Location: ACT
Car: An Outback
Real name: Luke


Return to 2.0R engine specific

Who is online

Users browsing this forum: No registered users and 5 guests