Thanks guys
Spent a few hours in the car with the kids today so it had a bit of a work out. A couple of minor bugs, but nothing too hard to fix.
1. The power / reset button on the PC case can be accidently hit if your kid is in the back pushing on the floor mats lol. I will relocate the button away from the case.
2. Need to set the screen to never sleep, or else when watching a movie, the screen will switch off, very annoying
Here are some pics of the install as promised.
This was the mess my car was in whilst doing the install, it actually got a lot worse but I didn't take a pic.
Subaru conveniently put an indent under the drivers seat just for the Car PC
I'm a bit lazy and didn't want to unbolt the seat, so as you can see I ran a coat hanger to pull the wires under the carpet, worked well.
Here is where the computer now resides, it is fixed in place with velcro for easy removal.
The floor mat actually hides most of the wires, and with the drivers seat positioned to my driving position you can't see it at all.
Ran a 12g power cable from the battery through the front guard and in through the kick panel with a fuse just after the battery.
I also installed a USB hub in the glove box for handy access.
This is to show some of the wiring behind the deck. I have retained the power plugs for the screen and the USB hub and hard wired them in.
Reason being is that they have voltage stabilizers built into them.
And sorry for this photo, I took one last night just before it got dark and haven't had a chance to take another. So it will have to do for now.