Dry carbon Grille and Interior

[vp920b]

Hi all,

I just bought a dry carbon stickers and I just installed it in my car.

I put only for the center console and my chrome grill. No so bad, since I installed it by my self.

Here's some pics:




I still got 95cmx50cm left. I bought it for 70 dollars. The original size is about 1.3Mx0.5M.

If someone want it, just PM me for the price. Only for Melbourne area please(pick up), because I can't do postage.

Thanks

[smythie]

looks good

[vp920b]

Thanks mate...

[teK--]

Hehe I'm doing the same to my grill but Naldo beat me to it Looks good!

[vp920b]

I thought you want to wrap all the grille Jim?

Thanks

[teK--]

Nah I only wanted to do the chrome bits, like you have.

[teK--]

Here's mine using the 3M stuff. It's pretty easy to work with but difficult at times especially in the corners, when you end up with excess material bunched up. Most of my fingertips are burnt now from moulding the stuff in front of a hairdryer

[vp920b]

That is a great job Jim.

Sadly, my sticker on grill, someone peel it off. Dang it..

[vp920b]

I just changed my sticker, since my best friend gave me 3M stickers.

So the things that I changed were:




Tomorrow will be the grille.

Thanks

[nytrojen]

Here's mine using the 3M stuff. It's pretty easy to work with but difficult at times especially in the corners, when you end up with excess material bunched up. Most of my fingertips are burnt now from moulding the stuff in front of a hairdryer

Jim.... were you wearing short shorts when you took that photo?!?!? Look at the reflection... oh dear

[teK--]

Haha stop looking the junk inside my trunks!!!

Yeah I think they were boxer shorts. I just couldn't wait to get dressed so I went and fitted my newly wrapped bits to the car soon after I woke up

[teK--]

Looks good Naldo I was thinking of doing that cubbyhole lid as well but I think I'll just keep it minimal and on the side strips only.

I just noticed the weave on the lid is in the opposite direction to around your shifter, was that intentional?

[vp920b]

Looks good Naldo I was thinking of doing that cubbyhole lid as well but I think I'll just keep it minimal and on the side strips only.

I just noticed the weave on the lid is in the opposite direction to around your shifter, was that intentional?

Which one jim? I don't understand.

Thanks

[teK--]

Notice how the weave is in opposite directions?

[vp920b]

I changed around the shifters too, so that i would be same like the upper lid.

LOL

Thanks Jim. You're really into detail and nytrojen too.