Re: '08 BL9 2.5i. '91 BC6 awd and turbo conversion.
Posted: Fri Jun 03, 2022 9:19 pm
So just a small update.
All the fmic piping is done, and got the intake side sussed out, just waiting on a pod to afm adaptor and I can finish off that section, also need to add 2 bungs for the catch cans, once I work out where I am going to mount them. Fitted the Tomei FPR.
Pulled the interior out and gave it a decent vacuum before starting to rip the TCM.
And then pulling it out.
I have also made all the dump pipe to the crossover under the gearbox in 3", waiting on a new bung for my AEM wideband to arrive and I can get that in.
Pulled the rear subframe, dropped the tank slightly and got all the lines sorted, got the filler neck back in and subframe back in the car as well.
and my favourite. I pulled the deck out so I can get a couple of the lights repaired by Dad, he has repaired these before. Decks fine for me, has AUX input, works well and have some limited controls but radio works.
Pete.
All the fmic piping is done, and got the intake side sussed out, just waiting on a pod to afm adaptor and I can finish off that section, also need to add 2 bungs for the catch cans, once I work out where I am going to mount them. Fitted the Tomei FPR.
Pulled the interior out and gave it a decent vacuum before starting to rip the TCM.
And then pulling it out.
I have also made all the dump pipe to the crossover under the gearbox in 3", waiting on a new bung for my AEM wideband to arrive and I can get that in.
Pulled the rear subframe, dropped the tank slightly and got all the lines sorted, got the filler neck back in and subframe back in the car as well.
and my favourite. I pulled the deck out so I can get a couple of the lights repaired by Dad, he has repaired these before. Decks fine for me, has AUX input, works well and have some limited controls but radio works.
Pete.