Member Profile-(Libacy Gt) Gen V Gt AUTO Wagon

Show off what mods you've done to your car.

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby roh008 » Fri Aug 18, 2017 10:38 pm

jslayz wrote:Image

Smashed 2nd center diff with this.

That's an insane curve you maintain decent top end power across a decent range of rpm!

Is the center Diff the DCCD section at the end of the transmission? (No strengthening options)
Did Mick dr20t manage to overcome this at all?
roh008
 
Posts: 6
Joined: Thu Mar 26, 2015 8:40 am
Car: WRX STI MY11 5EAT

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby Libacy Gt » Fri Sep 22, 2017 2:41 pm

Will Update shortly, some progress.
Libacy Gt
 
Posts: 213
Joined: Sun Oct 16, 2016 3:13 pm
Car: Lib Gt Wagon Gen 5, 5EAT 2011
Profile URL: viewtopic.php?f=10&t=34162

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby Libacy Gt » Thu Oct 05, 2017 1:29 pm

JUST AN UPDATE:

I have recently installed a Built cosworth Closed deck rated for 400kw ATW. Currently on stock turbo so only 160kw atw, just trying to sort out what we can do with this transmisison before i go any further. Still have all the bolt ons as listed in the first page minus the upgraded 18g turbo. (had a leak, currently in repairs)
I will update thread when i can with details of the built engine.

From what i have gathered over the past few months regarding the transmission is:
1. Some People in the US have been running the 5EATS fully built at over 300kw with the Gen 4's , they have many similar internal components to the Gen V. Someone in the US is running a supercharged GEN V 3.6r with about 300kw and these transmissions are practically identical to the GEN V GT's
2. The biggest weak link is the center diff gears, they are just too weak and even with upgraded clutches many have broken them, some Even after cyro treatment and planetary bushings upgrade.
3. there is no upgrade for the GEN V valve body (no shift kit available at the moment)
4. STI manual conversion is a huge undertaking and someone in Taiwan attempted it but had many issues with canBUS communications. There are some manual Gen V Gt owners who are doing the 6speed swap however.

I have contacted PAR (a gear manufacturer) to see if they can custom build the Intermediate centre diff shaft, pinion/planetary gears and pinion shaft. ( these components are the weak link) They said they are happy to look into it, so im just gathering the samples to send to them.

I plan to do the EFR 6758 or 7163 Turbo twin scroll setup , will see what happens with the transmission otherwise i'm screwed.
Libacy Gt
 
Posts: 213
Joined: Sun Oct 16, 2016 3:13 pm
Car: Lib Gt Wagon Gen 5, 5EAT 2011
Profile URL: viewtopic.php?f=10&t=34162

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby jslayz » Thu Oct 05, 2017 8:43 pm

You will then break the bearing from the transfer of the case :wink: trust me.

I'm slowly killing this 6 speed and I'm not being mean to it.....
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby Libacy Gt » Thu Oct 05, 2017 11:58 pm

jslayz wrote:You will then break the bearing from the transfer of the case :wink: trust me.

I'm slowly killing this 6 speed and I'm not being mean to it.....


And then after that?
Libacy Gt
 
Posts: 213
Joined: Sun Oct 16, 2016 3:13 pm
Car: Lib Gt Wagon Gen 5, 5EAT 2011
Profile URL: viewtopic.php?f=10&t=34162

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby MadmanSean » Fri Oct 06, 2017 6:49 am

Pics of the Built Cosworth block for proof please :D
Subaru ECU Unbricking, Unlocking and Bench Flashing/Recovery service! Check out SICK CHIPS @ https://www.facebook.com/SickChips/
http://forum.liberty.asn.au/viewtopic.php?f=56&t=35489
If you'd like to say thank you feel free to Buy me a coffee https://www.buymeacoffee.com/sickchips
User avatar
MadmanSean
 
Posts: 188
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby jslayz » Fri Oct 06, 2017 10:28 am

Niz22 wrote:
jslayz wrote:You will then break the bearing from the transfer of the case :wink: trust me.

I'm slowly killing this 6 speed and I'm not being mean to it.....


And then after that?


Full rebuild it. is all I can do.
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby Libacy Gt » Fri Oct 06, 2017 11:00 am

MadmanSean wrote:Pics of the Built Cosworth block for proof please :D


lol, if i open my engine bay it looks completely stock , let me see if i can find some pics they sent me of the closed deck.
Libacy Gt
 
Posts: 213
Joined: Sun Oct 16, 2016 3:13 pm
Car: Lib Gt Wagon Gen 5, 5EAT 2011
Profile URL: viewtopic.php?f=10&t=34162

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby Libacy Gt » Fri Oct 06, 2017 12:31 pm

Ok Below are the details for the newly Installed Engine. Bolt ons and accessories are still the same as the mod list in the first page. Just to refresh peoples memory, i blew the previous stock engine, bearings went, due to oil starvation. Heads are stock but fully reconditioned and Turbo is stock but once i know for sure if im going over 300kw and a built transmission can handle it then i will install some aftermarket camshafts. Only running 160kw atw at the moment with stock turbo on E85 as i mentioned before due to limitations of transmission.
Car Runs great with built engine more smooth and quiet then stock engine, clean and crisp, Highway driving is exceptional.

All Drive Subaru 400kw Rated cosworth Closed Deck


Short block
Brand new STI EJ257 case halves
ADS CNC Alloy 6061 single piece closed deck inserts
Machine boring, honing, decking and torque plate
Drill, ream and tap 13mm head stud deep thread
Brand new Nitrated and cross-drilled crankshaft
New Cosworth forged billet 2618 pistons with ADS L.O.C design ( 9.2:1 CR)
New improved ADS low friction L.O.C piston ring set
New Cosworth forged EN24 H-Beam connecting rod set
New Cosworth H11 steel rod bolts (rated @ 260 000psi)
New revised race spec tri metal engine bearings (tested @ 1000hp)
New ADS high strength tensile block bolt set

Head Work
Completely recondiotned cylinder heads with 3 angle valve cut
New genuine Subaru valve stem seals
Surface grind cylinder heads
Cam shaft and journal polish


Accessories
New ARP super strong 13mm head stud kit
New Tomei centre folded super grommet design head gasket
New genuine Subaru seals, O-rings and sealing compounds
New genuine Subaru cast water pump (model suited)
Subaru and idler bearing kit with tensioner
New GATES Kevlar Timing Belt
New revised and improved 12mm h/d oil pump

Tuned by All Drive Subaru.
Attachments
image005 - Copy.png
image005 - Copy.png (238.72 KiB) Viewed 8925 times
image004 - Copy.png
image004 - Copy.png (243.03 KiB) Viewed 8925 times
image003 - Copy.png
image003 - Copy.png (250.65 KiB) Viewed 8925 times
image002.png
image002.png (208.87 KiB) Viewed 8925 times
image001 - Copy.png
image001 - Copy.png (233.66 KiB) Viewed 8925 times
Libacy Gt
 
Posts: 213
Joined: Sun Oct 16, 2016 3:13 pm
Car: Lib Gt Wagon Gen 5, 5EAT 2011
Profile URL: viewtopic.php?f=10&t=34162

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby jslayz » Fri Oct 06, 2017 9:03 pm

:biggrin:

Sweet!
CURRENT - ATP GTX 3576 - 22psi - 283.7awkw
OLD - Dom 1.5Xtr - Last dyno 254ahkw, previous 238ahkw, first 224awkw.
My journey thread: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523
My Lib Pics here: http://forum.liberty.asn.au/viewtopic.php?f=10&t=15523&start=570#p370656
User avatar
jslayz
 
Posts: 2810
Joined: Tue Mar 09, 2010 11:32 pm
Location: Perthhhhhh
Car: 2005 Liberty GT Wagon
Real name: J

Re: Member Profile-Niz22 Gen V Gt AUTO Wagon

Postby MadmanSean » Fri Oct 13, 2017 7:44 am

Heck YEAH! 8)
Subaru ECU Unbricking, Unlocking and Bench Flashing/Recovery service! Check out SICK CHIPS @ https://www.facebook.com/SickChips/
http://forum.liberty.asn.au/viewtopic.php?f=56&t=35489
If you'd like to say thank you feel free to Buy me a coffee https://www.buymeacoffee.com/sickchips
User avatar
MadmanSean
 
Posts: 188
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member Profile-(Libacy Gt) Gen V Gt AUTO Wagon

Postby Libacy Gt » Mon Dec 04, 2017 5:36 pm

UPDATE:
Torque converter and valve body have crapped themselves , Rough on Idle drive and valve body doing all sorts of funny things, codes were pulled which confirmed valve body and converter problem.

Will use this opportunity to do a full transmission rebuild including making aftermarket gears for the transfer case. Will update upon progress. Once i sort out the transmission then i will start playing with power and making use of the 400kw rated engine.
Libacy Gt
 
Posts: 213
Joined: Sun Oct 16, 2016 3:13 pm
Car: Lib Gt Wagon Gen 5, 5EAT 2011
Profile URL: viewtopic.php?f=10&t=34162

Re: Member Profile-(Libacy Gt) Gen V Gt AUTO Wagon

Postby superjoshism » Sat Dec 23, 2017 10:15 pm

Libacy Gt wrote:UPDATE:
Torque converter and valve body have crapped themselves , Rough on Idle drive and valve body doing all sorts of funny things, codes were pulled which confirmed valve body and converter problem.

Will use this opportunity to do a full transmission rebuild including making aftermarket gears for the transfer case. Will update upon progress. Once i sort out the transmission then i will start playing with power and making use of the 400kw rated engine.


Very nice mate, glad you have a path forward!
superjoshism
 
Posts: 266
Joined: Thu Aug 21, 2014 10:17 pm

Re: Member Profile-(Libacy Gt) Gen V Gt AUTO Wagon

Postby Libacy Gt » Wed Apr 18, 2018 9:17 pm

Libacy Gt wrote:UPDATE:
Torque converter and valve body have crapped themselves , Rough on Idle drive and valve body doing all sorts of funny things, codes were pulled which confirmed valve body and converter problem.

Will use this opportunity to do a full transmission rebuild including making aftermarket gears for the transfer case. Will update upon progress. Once i sort out the transmission then i will start playing with power and making use of the 400kw rated engine.


UPDATE!
long overdue follow up, Not much has happened since last post. So valve body was faulty which is common on the Gen V's , i got a new valve body installed. Torque converter was fine. I didn't do the transmission build, because nobody can build this transmission to my desired power levels , it will just be trial and error and i cant afford that. Car has been running fine since built engine, about 7000km since rebuild. Looking for a good bolt on turbo that will at-least take me to 200kw. There is only one bolt on turbo on the market for the Gen V but ive heard some bad things about it.

Car is fun to drive, the stock turbo matched with the high compression built engine actually goes really well, very quick spooling, of course current power level is getting quite boring. I don't think the future looks good for this build as the transmission is the biggest obstacle. Manual transmission swap for the Gen V has not been done before, also it will be extremely costly, so i cant go down that path. We will see what happens.
If anyone knows someone who has done an auto Gen v built tranny for high power levels, please let me know.
Libacy Gt
 
Posts: 213
Joined: Sun Oct 16, 2016 3:13 pm
Car: Lib Gt Wagon Gen 5, 5EAT 2011
Profile URL: viewtopic.php?f=10&t=34162

Re: Member Profile-(Libacy Gt) Gen V Gt AUTO Wagon

Postby applegeek897 » Fri Apr 20, 2018 8:12 am

Pity mate, would you consider a 6MT car and just swapping engines over? That might be the cheapest and best option. In saying that the Gen 5 5+1 box would still need to be swapped out for something else.
Daily: '00 Daihatsu Cuore "Kelly" - Build Thread -
Project / Weekender: '05 Subaru Liberty 3.0R-B Wagon - Build Thread -
Motorcycle: '14 Triumph Street Triple 660 - Build Thread -
User avatar
applegeek897
 
Posts: 246
Joined: Sun Jun 07, 2015 1:02 am
Location: Sydney, NSW
Car: 05' 3R-B Wagon, 00' Daihatsu Cuore
Real name: James
Profile URL: viewtopic.php?f=10&t=31247

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 7 guests