Re: Member Profile - Lorby's liberty
Posted: Sun Aug 20, 2017 4:34 pm
Alrighty, so found the answer to above. Turns out they ship with adapters normally. Looks like the set I got from yahoo JP didn'tm have them, also discovered later on that the Display panel that came with the adapter has no working backlight. Disappointing considering how much it cost. Cut the screw tabs off my old display panel and mounted it to the adapter. Used a heatgun, some sikaflex and some sealijng rubber to fit my cut up vents from my origibnal cubby to fit over these ones.
All done and all fitted now:
Used an ftdi 2323 OBD2 usb adapter and seems to be working great. BTSSM is responsive and gives heaps of options. I haven't finished setting up gauges and stuff yet. I have some very interesting learned values though and my car is basically knock central atm which I will have to look into.
New AFR sensors and MAF sensor fitted. Also made sure my passengers won't get sprayed with hot shrapnel and disabled the passenger side air bag.
They look alright when I finally get around to cleaning them .
All done and all fitted now:
Used an ftdi 2323 OBD2 usb adapter and seems to be working great. BTSSM is responsive and gives heaps of options. I haven't finished setting up gauges and stuff yet. I have some very interesting learned values though and my car is basically knock central atm which I will have to look into.
New AFR sensors and MAF sensor fitted. Also made sure my passengers won't get sprayed with hot shrapnel and disabled the passenger side air bag.
They look alright when I finally get around to cleaning them .