So looks like photobucket has dicked everything up by disabling 3rd party linking. Qill have to try and change all the links and lose the thumbnails until I move them all
.
Anywho. Worked on the turbo prelude a fair but. Ended up being the midshaft seal rather than the bellhousing itself so luckily didn't have to pull the whole box. 'Have just finished changing the turbo drain as it was still leaking. Used a 60 degree fitting on the sump and an oringed turbo flange for much better sealing and fitment (at great expense). Re braised and sealed the sump fitting for my oil temp adapter also. Now hopefully the only leak is the PS rack, which I'm putting off for as long as possible
.
Back to liberty stuff! Helped a friend change his centre diff over in his 6mt PostFL GT. Lots of fun :/. At least it was a bit easier having done it once before. The dowels were a bitch though.
On mine have changed over the whiteline universal style endlinks after endless issues with them breaking free after a period of time and causing knocks. Put on some solid style perrin endlinks. So far 100x better, will have to test their longevity though, not overly happy about the angle (it's slightly better than the pic after I added the extra washers, but still not ideal). Time will tell!
Looks like I'm losing a wheel bearing too, after about 10 mins on the highway she starts making a high pitched whining that gets noisier. It's hard to tell which rear wheel it is though, will wait a little while till it gets louder and pin point it hopefully.
Next issue I'm having with the lib though, is the stupid idle. Under braking when coming to a stop it drops fairly low. Makes it difficult/dangerous when trying to take off quickly from a near stop at round abouts etc. I've done a bit of research but nothing seems to be helping so far. Changed the PCV valve, cleaned the hose. Throttle body cleaned the butterfly, cleaned maf sensor. Tried bleeding coolant a few times. No engine lights, but will have to put the data logger on, any ideas what sensors might help find the issue? Thanks guys!