Member profile - MadmanSean - RIP

Show off what mods you've done to your car.

Re: Member profile - MadmanSean

Postby MadmanSean » Thu Apr 06, 2017 9:22 am

That puzzling moment when you realize the previous owner was a sparky.... I believe this was to turn a Sub Amp on...
20170405_191133 (Small).jpg
Light Switch
20170405_191133 (Small).jpg (134.76 KiB) Viewed 1673 times

Finally got around to wiring in a relay for the W2A pump, no more jamming wires into the battery terminals every day. Popped the plastic out with a flat screwdriver, the silver ring comes out easy and then the black piece around the gear stick is separate. Its little harder to pop the clips on this bit but its not fragile. Then the Coin holder/lighter part pulls out towards the gear stick, easy peasy.
20170405_191124 (Small).jpg
P1
20170405_191124 (Small).jpg (117.7 KiB) Viewed 1673 times

20170405_191240 (Small).jpg
P2
20170405_191240 (Small).jpg (104.99 KiB) Viewed 1673 times

20170405_191418 (Small).jpg
P3
20170405_191418 (Small).jpg (95.1 KiB) Viewed 1673 times


A little sketch of how it was wired :)
This means the W2A pump comes on when i turn the key to ACC - Prob's not going to be ideal in the long run as it would be best to trigger the relay when key is at ON position. But for now to save me from jamming wires in and out and potentially forgetting to turn the pump ON before i drive, it'll do.
20170405_165235 (Small).jpg
Schematic
20170405_165235 (Small).jpg (72.67 KiB) Viewed 1673 times
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member profile - MadmanSean

Postby MadmanSean » Tue Apr 25, 2017 7:28 pm

Met up with Matt yesterday, he tidied up the tune :)
Now that i have a bead rolled on the throttle tube and the hose isn't split/ popping off all the time, BOOST is WICKED! Peak is ~18psi in Sport # :D
As seen below, Torque delivery is nice and linear. Spool up looks a little slow in comparison to others, i believe this is a good thing as i'm still on stock bottom end Haha. Really easy to drive around town

GTX3071 Gear2 runs 25042017.JPG
GTX3071 Logs G2
GTX3071 Gear2 runs 25042017.JPG (246.48 KiB) Viewed 1638 times


Graph is of Second Gear. Sport # Vs Sport
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member profile - MadmanSean

Postby bigBADbenny » Wed Apr 26, 2017 12:08 am

Love it :)
How does it go in I mode? Did you get matts tune that more or less equalises the throttle angles whist providing 3 boost levels ? :P
User avatar
bigBADbenny
 
Posts: 8271
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member profile - MadmanSean

Postby MadmanSean » Wed Apr 26, 2017 9:24 am

bigBADbenny wrote:Love it :)
How does it go in I mode? Did you get matts tune that more or less equalises the throttle angles whist providing 3 boost levels ? :P

YES and YES! HAHA
Its actually still fun cruising around in I mode, i feel like i can here the wastegate more :)
Plus im fairly sure I mode with 12psi still makes a fair bit of POWAR (Enough for my GF :twisted: ) but the way its delivered is very smooth!

Ill try and do some more logging soon, roads in my area have been too busy to get 3rd gear runs... and not to mention cops... they are like rats around here...
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member profile - MadmanSean

Postby MadmanSean » Wed Apr 26, 2017 11:48 am

Gathered some data from this mornings drive to work :)
This was logged using an ELM 327 and Torque PRO on Android. Logging is alot slower than when using a tactrix cable but its good for monitoring things each time i drive.
In addition to having it setup to log via bluetooth each time i'm in the car, i have Alarms setup to sound for things such as Coolant temp, IAT, Manifold pressure and Boost. Just in case things ever get out of control :)
Capture 1 _ Sport Sharp G2 to G3.JPG
Sport Sharp G2 to G3
Capture 1 _ Sport Sharp G2 to G3.JPG (208.08 KiB) Viewed 1623 times

Capture 1 _ Sport Sharp G2_ Higher Intake Temp.JPG
Sport Sharp G2 - Higher IAT
Capture 1 _ Sport Sharp G2_ Higher Intake Temp.JPG (100.51 KiB) Viewed 1623 times
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member profile - MadmanSean

Postby bigBADbenny » Wed Apr 26, 2017 11:56 am

Excellent, love that!
You'll like btssm even more than torque, but you'll need a kkl USB, the tactrix (both via otg) or btssm bt adapter.
Gives full ssm params inc ovc vvt...
I use megalog viewer ms to graph my logs: the 3 way scatter graphing (x, y, colour) is awesome :)
Can also setup custom params eg lh ocv minus rh ocv giving ocv angle delta, use that param in a scatter graph vs eg boost n revs. :P
Btssm also supports tcu logging for auto peeps: monitor temps etc...
User avatar
bigBADbenny
 
Posts: 8271
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member profile - MadmanSean

Postby MadmanSean » Wed Apr 26, 2017 1:22 pm

bigBADbenny wrote:Excellent, love that!
You'll like btssm even more than torque, but you'll need a kkl USB, the tactrix (both via otg) or btssm bt adapter.
Gives full ssm params inc ovc vvt...
I use megalog viewer ms to graph my logs: the 3 way scatter graphing (x, y, colour) is awesome :)
Can also setup custom params eg lh ocv minus rh ocv giving ocv angle delta, use that param in a scatter graph vs eg boost n revs. :P
Btssm also supports tcu logging for auto peeps: monitor temps etc...


Nice! I should really pull my finger out and make the switch to btssm. I can see the advantages. cheers for the help BBB :)
Logging lh OCV vs rh OCV i really need todo as i seem to keep getting CEL's for P0011 and P0021.
Screenshot_2017-04-15-21-26-53.png
CEL
Screenshot_2017-04-15-21-26-53.png (87.97 KiB) Viewed 1610 times

I originally thought this was todo with having filters in the Banjo bolts but i have since removed them and still randomly get the CEL's. I then changed oil and engine oil filter to see if that would work... no luck... Any ideas?

And finally last update for now, changed the fuel filter and pump sock.
After running E85 for awile the fuel bucket was pretty grotty and so was the sock on the pump.
Screenshot_2017-04-26-12-59-05.jpg
Fuel STUFFS
Screenshot_2017-04-26-12-59-05.jpg (96.6 KiB) Viewed 1610 times

Screenshot_2017-04-26-12-59-22.jpg
Bucket
Screenshot_2017-04-26-12-59-22.jpg (54.91 KiB) Viewed 1610 times

Screenshot_2017-04-26-13-00-56.jpg
New Filter
Screenshot_2017-04-26-13-00-56.jpg (42.44 KiB) Viewed 1610 times

Screenshot_2017-04-26-13-01-20.jpg
Old Filter
Screenshot_2017-04-26-13-01-20.jpg (67.76 KiB) Viewed 1610 times


As everyone says E85 definitely cleans out the fuel lines/system i've probably done just over 5,000Km's on E85.
More maintenance to come :)
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member profile - MadmanSean

Postby bigBADbenny » Thu Apr 27, 2017 11:40 am

You'll want to try logging the ocv angles, swapping the ocv's between l&r sides to see if the issue follows.
Pending logging, cleaning the cam sensors is a possibility as well.
If ocv logging reveals an issue then cleaning by activating the ocvs with a 9v battery in wd40 or similar may work, or replace with new via eg partsouq. Diys on this forum...
User avatar
bigBADbenny
 
Posts: 8271
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member profile - MadmanSean

Postby MadmanSean » Thu Apr 27, 2017 12:22 pm

bigBADbenny wrote:You'll want to try logging the ocv angles, swapping the ocv's between l&r sides to see if the issue follows.
Pending logging, cleaning the cam sensors is a possibility as well.
If ocv logging reveals an issue then cleaning by activating the ocvs with a 9v battery in wd40 or similar may work, or replace with new via eg partsouq. Diys on this forum...


Cheers Benny, I jumped the gun a little in asking for help... I did find your post from 2015 with info here at post #59
https://forums.nasioc.com/forums/showth ... 656&page=3 :)
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member profile - MadmanSean

Postby Archie01 » Thu Apr 27, 2017 1:32 pm

Awesome stuff!
Im enjoying the progress on your car :)
Archie01
 
Posts: 85
Joined: Mon Dec 09, 2013 8:09 pm
Car: MY05 Liberty Wagon GT Auto

Re: Member profile - MadmanSean

Postby bigBADbenny » Thu Apr 27, 2017 1:43 pm

The symptom of avcs cam gears requiring cleaning or replacement is mainly that, as seen in logs, the ocv angle is either inactive or activates then gets stuck.
DIY cleaning is possible, otherwise replace them.
Whereas ocv issues are lag during activation or oscillation just above idle or during cruise.

https://www.google.com.au/search?sclien ... R4rU&pbx=1
User avatar
bigBADbenny
 
Posts: 8271
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member profile - MadmanSean

Postby MadmanSean » Fri Apr 28, 2017 9:11 am

bigBADbenny wrote:The symptom of avcs cam gears requiring cleaning or replacement is mainly that, as seen in logs, the ocv angle is either inactive or activates then gets stuck.
DIY cleaning is possible, otherwise replace them.
Whereas ocv issues are lag during activation or oscillation just above idle or during cruise.

https://www.google.com.au/search?sclien ... R4rU&pbx=1

Thanks again Benny :)
I have previously followed this thread viewtopic.php?f=10&t=30105&p=407081#p407081 to remove the Banjo filters and clean the OCV's.
But like i said the codes came back... i'm just going to replace the OCV's with new ones and failing that ill clean up the AVCS Cam gear when i do my timing belt (Soonish). Following this viewtopic.php?f=18&t=20233

Tonight ill do some logging of lh vs rh CAM angles and post my findings :)

FYI; I'm placing links in to threads so that if any other NOOBS are curious about this stuff they can find it a little easier (Maybe), i'm not a mechanic but having a walk through makes things abit less daunting :)
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member profile - MadmanSean

Postby MadmanSean » Fri Apr 28, 2017 9:22 am

Archie01 wrote:Awesome stuff!
Im enjoying the progress on your car :)

Cheers mate! :D
Trying to keep it well documented.
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

Re: Member profile - MadmanSean

Postby bigBADbenny » Fri Apr 28, 2017 9:50 am

Grouse, post eg a Dropbox link to the log file and I'll take a peek in megalog. Freeway cruise and holding 1500-1800rpm in neutral plus a wee pull should be heaps, in any order...
User avatar
bigBADbenny
 
Posts: 8271
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member profile - MadmanSean

Postby MadmanSean » Fri Apr 28, 2017 8:57 pm

Logging went well.... Things were logged... :/

One of these things is not like the other....!
AVCS_LOG_Small.jpg
AVCSAngles
AVCS_LOG_Small.jpg (53.89 KiB) Viewed 1546 times

Link to the Log file: https://drive.google.com/open?id=0By_yr ... Vg1ZjlMYXM
Pretty clear that a new OCV is in order Haha :)
Garage:
2007 Subaru Liberty GT SpecB wagon - RIP
Cosmic Racing Coilovers | Kobe 340 Pump | AVO 3" Inlet | ID1000 | DBA T2 Discs | MU NS400 Pads | Invidia DP | Tomei FPR | Tuspeed BCS | GTX3071 | TGV Delete | W2A Intercooled | Catch Can | 20 Row Trans Cooler | Cusco Stuff | Whiteline Stuffs | Kido Tuned E85 | Empire 3" Exhaust |

1996 Hilux Surf SSRG
Non intercooled 1kz-te | Diesel | Auto | 2" Lift | 18psi MBCS | K&N Filter | 33" Muddies | 105RWkW and a shit tonne of Torque!
User avatar
MadmanSean
 
Posts: 163
Joined: Tue Mar 17, 2015 6:27 pm
Location: Melbourne
Car: 2007 Libert GT SpecB wagon
Real name: Sean
Profile URL: viewtopic.php?f=10&t=33793

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 4 guests