Wow that paint on the brembos looks the tits!
Good work keep it up, any goals of when the car will be running ?
jslayz wrote:Great progress!
dr20t wrote:That paint colour on calipers is amazing
What's the plan with the huffer?
Jordan.k wrote:Wow that paint on the brembos looks the tits!
Good work keep it up, any goals of when the car will be running ?
bigBADbenny wrote:Looking good, yep that stripped bolt can be replaced with one slightly longer (4/5mm?), if you want to avoid splitting the block to helicoil it.
bigBADbenny wrote:Seen, please post a pic of the offending location. Was the tq setting maybe 5ft/lb too optimistic?
HardwareBoB wrote:I was doing up the bolt, and it's stripped the whole thread from the block, cleanly.
GONEWALKABOUT wrote:Solid progress so far mate
What advantages did you research with the JDM sti cams, purely top end to get you closer to the 300 mark?
Also what rear housing A/R did you go with the 3071
GONEWALKABOUT wrote:Interesting, I am also looking cams currently and there seems to be a wealth of money to be spent and mistakes to be made.
From what i read some of the spec C cams can be around 260 duration 9.8mm lift, which seems on the ridiculous end of aggressive for a subaru OEM part. however this was just speculation and could be wrong. No doubt with dual AVCS you could retain drivability down low.
dr20t wrote:GONEWALKABOUT wrote:Interesting, I am also looking cams currently and there seems to be a wealth of money to be spent and mistakes to be made.
From what i read some of the spec C cams can be around 260 duration 9.8mm lift, which seems on the ridiculous end of aggressive for a subaru OEM part. however this was just speculation and could be wrong. No doubt with dual AVCS you could retain drivability down low.
Matt's cams that he has there if similar to my spec c ones are around 262 degree inlet, 258 degree exhaust, with 9.8mm inlet valve lift and 10.5mm exhaust valve lift.
Cam Durations
Intake Cam Lift: 8.89mm
Exhaust Cam Lift: 9.64mm
Intake Duration @ 0.010: 269.37
Intake Duration @ 0.020: 234.18
Intake Duration @ 0.050: 207.25
Exhaust Duration @ 0.010: 290.87
Exhaust Duration @ 0.020: 246.98
Exhaust Duration @ 0.050: 219.03
Valve Durations
Intake Valve Lift: 8.59mm
Exhaust Valve Lift: 9.29mm
Intake Duration @ SEAT: 260.23
Intake Duration @ 0.010: n/a
Intake Duration @ 0.020: 218.02
Intake Duration @ 0.050: 201.62
Exhaust Duration @ SEAT: 272.82
Exhaust Duration @ 0.010: n/a
Exhaust Duration @ 0.020: 228.38
Exhaust Duration @ 0.050: 212.62
Users browsing this forum: Google [Bot] and 13 guests