Good news! The air panel fits! So i guess BP BL do share the same air box as BM BR Liberty's.
Didn't get any pics of the installation i had to rush it because the mozzies were eating up my legs
The steps are as follows;
Remove the clips holding down the air intake (I've broken one of mine and the other is on the verge of breaking, anyone know where i can get them?)
Remove air intake
Unclip the two metal clasps on the top of the airbox
Unscrew a bolt on the right side of the air box 10mm? socket + a really long extender(Almost burnt my hand on the engine block, i did this pretty much right after parking the car lol)
Unscrew a nut hidden on the front left of the air box 10mm? Spanner (It should be under the frame tucked away neatly)
Jiggle them apart (The screw that goes into the frame with the rubber mount might scratch up the paint when you jiggle it, jiggle it with caution)
Replace the filter with the brand new HKS filter(Remember which way the old filter was facing, otherwise the HKS Filter has a side where the edges angle inwards to the center. This faces towards the front of the car)
Put it back together and you're done!
Haven't tested it yet, soon as i was done i ran inside the house. Dam pests, almost caught one sucking on my leg.
Still have a 24mm front sway bar to install. I hope that improves turn ins.