Page 1 of 59

Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 8:26 pm
by Boostaddict
Hey Guys and Gals,

Thought i should get around to doing one of these.

I bought my 6 Speed 07 Spec B Tuned by Sti in Oct 11. Number 2 of 300.

Mods List

Exterior

Corazon Grill
Sti Badge
Led Parkers
Fog Light Covers modded to fit FMIC pipes
Front bar modded to fit FMIC
Green Valve caps (Complements of Tempe Tyres)
800-SST Number Plates. ( +35 Kw atw atleast )

Interior

Cheap Boost gauge mounted on vent
Smelly Pig on mirror
Full Hectik custom race seats in the rear, with inbuilt speakers. (kids seats)

Drive Train

Beat Rush rear diff support
Perrin Pitch Stop
J Speed LCA's
RDA Slotted and Dimpled Rotors (Front)
Slotted Rears with unknown pads
Hawk Pads (Front and soon to be rears)
Goodyear eagle Asymmetric 2's 225/40/18
Exedy Sports organic clutch ( Read CRAP )

Suspension

BC BR Coil overs

Engine

Early (circa mid 90's ) NA 2.5L block with Darton sleeves
2013 heat treated and nitrided crank
ACL race bearings
Tomei Rods
CP big bore 100.5mm pistons.
Cosworth head gaskets
ARP Custom age 625 head studs.
2.0L 04\05 Sti heads. Stock ports
Kelford 264/260 cams
Kelford Titanium valve springs and retainers
11mm Sti oil pump
Killer B oil pickup
New water pump, thermostat, gaskets etc etc.
TGV's Deleted.
Perrin Lightweight crank pulley.
All the EGR and pollution gear has been removed due to the heads and block not accepting it.

Power Mods :twisted:

Hyperflow Intake Pod
AVO Front Mount with custom cold pipe
Perrin turbo inlet
Full turbo back exhaust with 2 single 4" tips.
GFB adjustable blow off valve
Pulse Tuned when i bought it.
Then Kido Tuned.
Now Parramatta Vehicle Specialists (PVS) Hub dynoed to 202.679 Kw atw.

Daniel :D

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 8:27 pm
by Boostaddict
MMMMHHHH Slotted and dimpled

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 8:56 pm
by Caution
OM NOM NOM NOM
Going to raise the # plate?

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 9:04 pm
by circlethesky
Wow that is exactly what I would picture when I think of the perfect liberty. So nice!

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 9:24 pm
by jaydece
Nice and clean TB STI liberty Daniel 8)

Just the way I like them.....ehehehe :mrgreen:

Is your fmic piping still sticking out like that? could you re route them behind the fog light plastic covers? more stealth and neat looking :)

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 9:53 pm
by Boostaddict
Caution wrote:OM NOM NOM NOM
Going to raise the # plate?


Thanks manz

Yep... Just been lazy with the plates.!!

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 9:57 pm
by Boostaddict
circlethesky wrote:Wow that is exactly what I would picture when I think of the perfect liberty. So nice!



Thanks man!! Yeh im pretty keen on it to!!!

I was looking for a black TB Sti but when this came up and the price and kays.... Couldnt resist. And the wife had the exact same silver in a turbo foz at the time..... So it was a little weird having to exact same coloured cars.

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 10:06 pm
by Boostaddict
jaydece wrote:Nice and clean TB STI liberty Daniel 8)

Just the way I like them.....ehehehe :mrgreen:

Is your fmic piping still sticking out like that? could you re route them behind the fog light plastic covers? more stealth and neat looking :)



Thanks man....!! I love yours!!! Ive read your profile thread from start to finish!!! You have had some "issues"!! :lol:

Im not liking the pipes!! Never have. But the only thing i can do is cut the fog light innards out and mesh it up to cover them.!!! The original avo pipes are just HUGE.!!! Besides making all new ones up , im just gunna have to live with it!!

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 10:13 pm
by chubbs
Looking very clean mate! Love it! Silver is so good!

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 11:02 pm
by Jack_Keaka
Welcome to the forums new-comer. look forward to meeting you some time. pretty nice car... for a Gen4 :mrgreen:

you is in need of some pro photos innit! (i know a guy :wink: )

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 11:11 pm
by Boostaddict
Jack_Keaka wrote:Welcome to the forums new-comer. look forward to meeting you some time. pretty nice car... for a Gen4 :mrgreen:

you is in need of some pro photos innit! (i know a guy :wink: )



Oh thank you for the kinds words Jack. I'm just a fresh newbie here that hasn't been talking crap for ages.!! :wink:

You say you know someone that could do professional photo's , are you referring to RICCO??? :?: Cause I've seen his awesome professional shoots and love them.!!! :bad: :lol:

There is this super dodgy bloke on here tho :angry2: .... Drives a silver gen 3 with ghey green lights and shit. :bad: ..!! He said he could do a photo shoot. But his work looks f...... :shock: :shock: :cry: 8)

Oh wait....!!!! That's you.....!!! Shit man!!!

:air_kiss: :lol: :air_kiss: :lol: :air_kiss:

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 11:19 pm
by paggaz
About time you made one of these Daniel.
The front mount is secksii! :air_kiss: needs numberplate lift for max airflow 8)

Re: Member Profile - Boostaddict

PostPosted: Fri Jun 21, 2013 11:25 pm
by Boostaddict
paggaz wrote:About time you made one of these Daniel.
The front mount is secksii! :air_kiss: needs numberplate lift for max airflow 8)


Thanks man.... Big fan of the FMIC. For looks and function.

Yeh I think it's time I go to bunnings and by $2 brackets and fix up the plates. Any recommendations ??

Also I want to change the exhaust tips.... As they are a little homo!!! They stick out to far and have rolled edges.

I want straight/thin edges and about 2" LESS tip to tuck a little under the bar.!!!

Who would have thought that a man would want 2" LESS....!!! Makes a big difference I've heard!!! :lol: :lol:

Re: Member Profile - Boostaddict

PostPosted: Sat Jun 22, 2013 12:40 am
by alessandro132
Not enough short shorts :nono:

Re: Member Profile - Boostaddict

PostPosted: Sat Jun 22, 2013 8:55 am
by Boostaddict
:lol:
alessandro132 wrote:Not enough short shorts :nono: