club.liberty.asn.au

See last past.

New car has been purchased!

Well, it is a start and we all started somewhere!

Good luck with the build and there are still a couple of Gen 3 RX on this forum, Absolution is the one I know without looking. Be sure to check out his build thread if you have not already.

MH3.0R wrote:Well, it is a start and we all started somewhere!

Good luck with the build and there are still a couple of Gen 3 RX on this forum, Absolution is the one I know without looking. Be sure to check out his build thread if you have not already.

Thanks mate.

Yeah, I've been following the few on here.

Looking sweet man, liking the tail lights, wanted to do it on mine but had no idea what it looked like, deffs gonna give it a try!

effortz wrote:Looking sweet man, liking the tail lights, wanted to do it on mine but had no idea what it looked like, deffs gonna give it a try!

I bought them pre-tinted. My old garnish and tail lights were full of moisture. The reverse lights were much worse then they are tinted

stocky wrote:

effortz wrote:Looking sweet man, liking the tail lights, wanted to do it on mine but had no idea what it looked like, deffs gonna give it a try!

I bought them pre-tinted. My old garnish and tail lights were full of moisture. The reverse lights were much worse then they are tinted

Ah true, my mate got a defect for having tinted rear lights, but his were stupidly tinted, yours don't look too bad haha

effortz wrote:

stocky wrote:

effortz wrote:Looking sweet man, liking the tail lights, wanted to do it on mine but had no idea what it looked like, deffs gonna give it a try!

I bought them pre-tinted. My old garnish and tail lights were full of moisture. The reverse lights were much worse then they are tinted

Ah true, my mate got a defect for having tinted rear lights, but his were stupidly tinted, yours don't look too bad haha

Yeah, it appears to be just a light coat. They'll look better when I eventually polish them.

I'm trying to find brighter lights, but LED bulbs as brakes are useless, CREE LED reverse lights are expensive and I need to source a reliable Flasher Relay for the indicators to make them LED.

stocky wrote:Yeah, it appears to be just a light coat. They'll look better when I eventually polish them.

I'm trying to find brighter lights, but LED bulbs as brakes are useless, CREE LED reverse lights are expensive and I need to source a reliable Flasher Relay for the indicators to make them LED.

Yeah LED's would look awesome, I want the B4 tail lights really bad but for time being the tint wouldn't hurt, installing LED's on the oem tail lights would be a challenge for me lmao

effortz wrote:Yeah LED's would look awesome, I want the B4 tail lights really bad but for time being the tint wouldn't hurt, installing LED's on the oem tail lights would be a challenge for me lmao

The B4 ones aren't any different?
Unless you mean the Legacy ones?

Jack_Keaka is looking in to installing proper LED's in to the tail lights.

So I haven't done an update in like 3 months! Haha ... ooops!

Over the last 3 months the mods/fixes/purchases I've done are:

- UEL's
- Ultrex Front lip
- B4 rear sway bar
- JDM HID's
- RFRB grille
- New door cards
- Sound deadener
- Rear strut brace
- JDM Legacy garnish and tail lights
- STi pitch stopper and transmission mount
- Works engineering oil cap
- New rear badge
- BC V1 coilovers
- JDM Monsoon's/weathershields
- STi pedal kit for MT
- Momo gearknob

... and yada yada yada ... I'm sure there's more!

Pictures will come eventually ..

Soooo... looks like turbo time is coming earlier then expected!

Car is being parted out: http://forum.liberty.asn.au/viewtopic.php?f=68&t=23937

Minor update... hah!

She's moved on. I now have turbo!

Hi all!

Back from the darkside I have come.

Missed my Liberty and had to come back.

It's a 2003 MY03 Subaru Liberty B4 sedan in 01G Silver.

Car's build to date:

ENGINE/DRIVETRAIN:
Converted to single VF34 turbo
CP Forged Rods & Pistons - Engine built by Toys Garage
Heads rebuilt
3" TBE
Equal length headers
Massive ebay-spec TMIC
Hyperflow CAI
02 WRX ECU
Tuned by MSR @ ~215kwatw
Exedy HD clutch

WHEELS/BRAKES/SUSPENSION:
Slotted front rotors
Cusco Zero 2 Comfort coilovers
Cusco H-brace
Whiteline HD ALK

EXTERIOR/COSMETICS:
JDM HID headlights

INTERIOR/ICE/GAUGES:
Gen 4 5-speed knob
AEM Wideband UEGO gauge
Defi BF Boost gauge
Defi BF Link
Pioneer AVH-X5650BT
Pioneer TS-D1720C front speakers
Pioneer TS-A1675S rear speakers

The plan for this car will be with minimalist in mind, I will keep modding it, but rather then doing the whole "Look at me!" thing I was doing on the Bug, everything will basically be black or hidden on this one. The aim is a nice clean "stock" looking Liberty that can give people a shock when you put your foot down.

At the moment, the plan is to get my Inner-Cruisn on and give the car a much needed strip, clean down and re-wire.

Then my way shall begin!

Have already sourced a Gen 3 specific front mount kit to remove the bloody bonnet spacing haha..

Holy shit!! I spotted this beast while I was working around your area. Distinctly remembered that plate! This was ages ago, I had no idea it was you. Nice build mate, hope to see more progress soon.

Pretty sure he has an Evo now, only got it a couple of weeks ago