Page 1 of 2

Member Profile - weschappy

PostPosted: Sun Jun 09, 2013 12:43 am
by weschappy
Hey guys,
Updated profile with my latest car.. and its another liberty.

'01 Liberty RX Sedan-- sold.
'05 Liberty 3.0R Spec B. PreFL -- dead :(
Current Car: '07 Liberty 3.0R Spec B PostFL

Mod List:
Completed
    Low beam 6000k HID kit
    Fog light 6000k HID kit
    LED parker
    LED number plate
    LED interior
    CCFL 'Angel Eyes' Rings
    --> (all supplied by Leo)
    Anylink AL-1080D (AUX/Iphone)
    Genuine STI Front Lip
    Genuine STI Rear Lip Spoiler
    Corazon Grill
    E85 Kido Tuned
    DIY Number Plate Lift
    DW65c Fuel Pump
    Reversing Camera
    SatNav hack
    HDMI output

    Raptor Headers
    Xforce Centre and Y-Pipe
    100cell High Flow Cats
    3rd Cat Delete
    TCP Quads
    Intake Resonator Delete

    Shockworks
    AD08Rs 225/40/18
    Work Kai 18x8.5 +35

    Whiteline Antilift Kit
    Rolled Guards


Before:
Image

After:
Image

Re: Member Profile - weschappy

PostPosted: Sun Jun 09, 2013 2:21 am
by rooby
Welcome.

The headlight dramas are not so uncommon.

There is some discussion here - viewtopic.php?f=10&t=13236

Re: Member Profile - weschappy

PostPosted: Sun Jun 09, 2013 12:36 pm
by weschappy
Didn't realise it was so common. I'm just glad I didn't have to fork out $755 for Subaru to fix it!

Re: Member Profile - weschappy

PostPosted: Tue Jun 10, 2014 10:12 pm
by weschappy
**Updated original post with new car**

Re: Member Profile - weschappy

PostPosted: Wed Jun 11, 2014 10:09 am
by hks180
Looking great Wes !!

The grill and lip change the look of the car quiet a lot !

Keep up the good work.

Re: Member Profile - weschappy

PostPosted: Fri Jan 23, 2015 2:05 pm
by weschappy
Lots of progress since last update.

✓ Shockworks installed
✓ Complete exhaust- Raptor Headers --> 100cel cats --> 3rd cat delete --> X-force mid and y-pipe --> TCP Quads
✓ Intake Resonator delete
✓ Work Kai 18x 8.5 +35
✓ AD08Rs 225/40/18
✓ OEM Sat Nav Hack, HDMI output

Image
Image
Image
Image
Image

Re: Member Profile - weschappy

PostPosted: Fri Jan 23, 2015 5:15 pm
by owen
Looking good Wesley. How's that twin turbo kit coming along?

Re: Member Profile - weschappy

PostPosted: Fri Jan 23, 2015 5:22 pm
by weschappy
Twin turbo kit should be happening soon. Revzone said they'd do it free of charge as a promotional campaign!

Re: Member Profile - weschappy

PostPosted: Fri Jan 23, 2015 6:11 pm
by bigBADbenny
Love it Wes! Moar pics plz :)

Re: Member Profile - weschappy

PostPosted: Fri Jan 23, 2015 6:23 pm
by owen
Love that custom exhaust

Re: Member Profile - weschappy

PostPosted: Fri Mar 06, 2015 7:58 am
by Daytona
Love the exhaust!
How's that exhaust working out for you?

I'm getting my exhaust in on Monday and kinda the same but with an Xforce catback.
Based on a couple other threads, was thinking of replacing the 3rd cat with a muffler to eliminate possible drone.

I was going to just delete the 3rd cat (two highflow cats after Raptor headers).

Re: Member Profile - weschappy

PostPosted: Fri Mar 06, 2015 10:06 am
by weschappy
Yer I'm loving the exhaust. Tad too much rasp in the higher rpm, luckily there is enough rumble down low to satisfy me.
I would recommend you make sure the centre/mid pipe is installed as high as you can get it. The way it comes from xforce means mine is hanging too low and scraping on most speedbumps. Other than that, you should love it!

I don't have much of a problem with drone, but I believe you will with xforce mufflers.

I'm keen to hear how yours goes and sounds, good luck!

Re: Member Profile - weschappy

PostPosted: Fri Mar 06, 2015 12:02 pm
by Daytona
Thanks for the tips, will let you know how it goes :-)

Re: Member Profile - weschappy

PostPosted: Fri Mar 13, 2015 8:04 pm
by GONEWALKABOUT
super super clean car! looks amazing, get a turbo on that thing!

Re: Member Profile - weschappy

PostPosted: Fri Mar 20, 2015 11:15 am
by KelvinTaylor88
Beautiful example of a Liberty, very well done mate.