Page 1 of 1

Member Profile - Owen1r - Gen 3 RX

PostPosted: Mon Jun 03, 2013 10:15 pm
by owen1r
Here is my current list of mods and how my car is looking at the moment. Any suggestions are muchly appreciated.

Current Mods -
18x8.5 +44 Rota Gforces, wrapped in 225/40
Custom 2.5 Cat back exhaust
BC V1 Coilovers
Whiteline Rear Sway Bar
Whiteline HD Links
JDM HIDs
RFRB Front Grille


Audio -
Focal PS165 Two Ways
Alpine Type R 12" Subwoofer
Alpine CDE-135BT Headunit
Alpine PDX-V9 Amplifier



Future Plans -

JDM RSK front bar
WRX Seats
Chu chu's


Image
Image
Image

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Mon Jun 03, 2013 10:23 pm
by cruisn
Very neat. Add a rear camber kit KCA399 to that list to get it sitting right with no rubbing.

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Mon Jun 03, 2013 10:28 pm
by owen1r
cruisn wrote:Very neat. Add a rear camber kit KCA399 to that list to get it sitting right with no rubbing.


Was kinda hoping I wouldn't need it haha. Best place to get them is ebay?

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Fri Jul 05, 2013 5:10 pm
by owen1r
Installed -

Whiteline rear camber bushes
rolled my rear guards
JDM Grill and some black muteki wheel nuts! (thanks chris)
JDM HIDs

This gave me a lot more room for more low!

Image


More low? Enough? Opinions please!

p.s No scrubbing.

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Sat Jul 06, 2013 1:14 pm
by Corsair
Looks sweet. 8)

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Sat Jul 06, 2013 11:44 pm
by effortz
Looks clean as nice man!
How was it installing HID's?

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Sun Jul 07, 2013 1:01 am
by owen1r
Pretty easy. Just need to solder a couple of wires, theres a diy around somewhere :)

Member Profile - Owen1r - Gen 3 RX

PostPosted: Sun Jul 07, 2013 5:15 am
by agan
Nice work Owen :)

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Thu Jul 11, 2013 2:14 am
by owen1r
Some more recent photos with the new grill.

Image
Image

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Thu Jul 11, 2013 10:13 am
by libz05
nice wheels!

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Thu Jul 11, 2013 4:09 pm
by effortz
Grill looks sweet as :D

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Thu Jul 11, 2013 7:11 pm
by owen1r
libz05 wrote:nice wheels!


Cheers :)

effortz wrote:Grill looks sweet as :D


I urge you to get one, really tidies up the front. Especially on the A-C Revisions

Re: Member Profile - Owen1r - Gen 3 RX

PostPosted: Wed Aug 07, 2013 6:37 pm
by owen1r
Went to go get my wheels aligned today, turns out the rear toe bolts are rounded completely... Lovely. So now I have to replace them then go back.

Can anyone reccomend some alignment settings for some nice handling/not much tire wear.. was thinking 1.5 degrees camber front/rear. Currently got 2 on the rear and 0.5 on the front.

Cheers