Member Profile - Brunsy3.0

Show off what mods you've done to your car.

Re: Member Profile - Brunsy3.0

Postby dawesy » Mon Mar 25, 2013 9:23 pm

Very nice car and nice mods so far .
And amazing find with your spraypainter not many people with a work ethic like that now
User avatar
dawesy
 
Posts: 584
Joined: Thu Oct 11, 2012 12:07 pm
Location: parramtta area
Car: my05 3.0R-B sedan
Real name: Chris

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Mon Mar 25, 2013 9:55 pm

haha thats for sure

he actually had resprayed the front bumper AGAIN!!! today and will be refitting it (hopefully for the last time) tomorrow so i will have to pick it up wednesday (due to work commitments) am getting a little too eager even though the entire centre console and other interior trim panels are still on the dining table so it will still be half a car

am doing some intense light mods so a lot of the car is in pieces (im sure a lot can relate)
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Wed Apr 03, 2013 11:37 pm

and thanks again to Leo (HKS180) for all of his lighting advice, products, and help along the way, has made it a much nicer car to drive (especially in the wet season)
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Fri Apr 05, 2013 7:22 pm

UPDATE

am currently waiting on a few items that will hopefully be here soon, have ordered a TDR-P from Wolstentech for the power windows so they will have function 30 seconds after the iginition is turned off. and have ordered some blue smd's to replace the factory red smd's for the interior switch illumination, eg. power window switches, SI DRIVE switch etc.

will take pics along the way incase anyone is interested in doing similar tasks, when done and uploaded feedback will be appreciated (good or bad)
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0

Postby bigBADbenny » Fri Apr 05, 2013 7:51 pm

Yeah! Please do :)
User avatar
bigBADbenny
 
Posts: 9125
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Member Profile - Brunsy3.0

Postby HoFF » Fri Apr 05, 2013 7:53 pm

Very interested in the power window mod
User avatar
HoFF
-stickered-
 
Posts: 1447
Joined: Sun Sep 05, 2010 11:39 am
Location: Southern Highlands NSW
Car: MY06 3RB Liberty Wagon 6MT MY09 Foz
Real name: Tom
Profile URL: viewtopic.php?f=10&t=13577&start=255

Re: Member Profile - Brunsy3.0

Postby seanmau5 » Fri Apr 05, 2013 10:09 pm

Your spray painter sounds like my mechanic.. You know you're winning when you find someone like that..

It'll be a mint example once ready mate, nice work :good:
~ Team VW ~ Das Auto ~
User avatar
seanmau5
-stickered-
 
Posts: 3305
Joined: Wed Mar 23, 2011 12:34 am
Location: Sydney, NSW
Car: 2009 Volkswagen Passat CC V6
Real name: Sean
Profile URL: viewtopic.php?f=10&t=13255

Re: Member Profile - Brunsy3.0

Postby Brunsy3.0 » Sat Apr 20, 2013 10:15 pm

thought id post up some pics of my workings, haven't installed into the car yet as I have a few more things to do to that part of the car

Image

stock switch

Image

stock led's

Image

one blue led


Image

blue led



will get some of the switch finished when installed back into the car, the actual switch itself needs another clear coat on it to finish it off then it will be back in the car and ill get some more photos up
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0 *UPDATED PICS 21-04-13*

Postby Brunsy3.0 » Mon May 06, 2013 7:13 pm

I finally installed the TDR-P (Time Delay Relay for the power windows), was a little different to install then described but I eventually figured it out

I will do a write up that should possibly help anyone who is looking to do this, ( the time delay can be set manually, I set mine to 30seconds from when the key is turned off, not sure how long it goes to, but I don't think I need it any longer)

ill upload the photos here but will put the write up on my other topic and will add links

http://forum.liberty.asn.au/viewtopic.php?f=6&t=15353

Image

here is the mess that I had to tidy up behind the headunit, and what I stripped and didn't end up needing that other thought necessary

Image
MESS

Image
yuk terminals

Image
personally id solder them at the same point, but that's just me

Image
doing it properly

Image
halfway there

Image
the leftovers

didn't end up taking any shots of the finished picture but it still ends up a little untidy, due to: GPS, Bluetooth, steering wheel control module, rca's etc.

In the near future ill be taking it back apart to work on some led's so ill take a quick pic and put it up here anyways
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0 *UPDATED PICS 21-04-13*

Postby zch91 » Mon May 06, 2013 7:20 pm

Holy shit! What a farking mess. BTW i'd heatshink the spade terminals going onto that relay for the time delay.. Just in case!

Looks good though mate.
User avatar
zch91
-stickered-
 
Posts: 2665
Joined: Sat Dec 24, 2011 11:12 am
Location: Darwin, NT
Car: MY04 GT Premium - Silver 5EAT
Real name: Zach
Profile URL: viewtopic.php?f=10&t=15397

Re: Member Profile - Brunsy3.0 *UPDATED 06-05-13*

Postby Brunsy3.0 » Mon May 06, 2013 7:29 pm

not a bad idea, when im down there next I may do this
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

Re: Member Profile - Brunsy3.0 *UPDATED 06-05-13*

Postby bigBADbenny » Mon May 06, 2013 9:06 pm

Love it! :)
User avatar
bigBADbenny
 
Posts: 9125
Joined: Tue Oct 04, 2011 6:36 pm
Location: Collingwood, Melbourne
Car: MY07 GT-B 6MT OBP Wagon
Real name: Ben Richards
Profile URL: http://tinyurl.com/agvbzop

Re: Member Profile - Brunsy3.0 *UPDATED 06-05-13*

Postby hks180 » Tue May 07, 2013 9:40 am

Nice work Dan !!
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2278
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Re: Member Profile - Brunsy3.0 *UPDATED 06-05-13*

Postby cruisn » Tue May 07, 2013 11:58 am

I see were in the same train of thought........ I love to down a few whilst working on the car. :mrgreen:

I can believe what some people do to their wiring. :shock:
User avatar
cruisn
 
Posts: 6560
Joined: Tue Nov 03, 2009 8:09 pm
Location: Melbourne
Car: MY02 GTB E Tune
Real name: Mark

Re: Member Profile - Brunsy3.0 *UPDATED 06-05-13*

Postby Brunsy3.0 » Tue May 07, 2013 1:49 pm

worst is that was a "professional" install, I nearly cried when they gave the car back
....THE WHITEWASH....
User avatar
Brunsy3.0
 
Posts: 1027
Joined: Tue Aug 30, 2011 7:01 pm
Location: Katherine, NT
Car: 07 3.0 Liberty Spec. B pearl white
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=21059

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: Google [Bot] and 5 guests