Member Profile - Brunsy3.0

[Brunsy3.0]

FINALLY put my centre console back in (the misses is stoked btw)

so some shots of the painted trims and also the blue led's installed, let us know what you reckon













and no I don't have a better camera haha

[bigBADbenny]

Love it!
What colour are the trims?

[peadya100]

Looks great!!
Did you have any success with the power window switch leds??

[hks180]

Nice work mate !!

[Brunsy3.0]

I got the silver trim pieces painted pearl white whilst he was painting my bumper and bonnet, I am yet to do the door trim pieces as I am waiting arrival of a door trim from Cruisn, and also am tossing up whether to paint the silver trims on the steering wheel, it will mean white outside and silver buttons so I am a bit sceptical at this stage, if anybody wants to try photoshopping them white so I can have a look I would highly appreciate it haha

with the power window led's I am currently waiting for the 3mm DIP led's to arrive, they should only be a couple of weeks away at this stage so will be good to get them going, they seem simple enough to change out, its just a matter of bending the leads off the led into shape to match the factory route, the one you sent Adam came apart fairly easily and to remove the led itself will be a walk, just don't have anything to change them over to at this stage

the most difficult is going to be the air con led's (AV panel from Phat/G88), as the dials are actually soldered into place and then after that's removed I will have to figure out what size led's they are and then change them out, I order the led's from the uk so they take around 3 weeks to arrive

[bigBADbenny]

So most of the LEDs you've swapped are press fit?
Bring on the DIY

[Brunsy3.0]

new led's need to be soldered inplace, sounds a lot harder than it really is, ill do some walkthrough's on some of them, not all as there are quite a lot and heaps are repetitive, it has been fun so far, good learning new things

[Brunsy3.0]

just did a quick walk through on changing the SI-DRIVE led's to blue (or colour of choice)

have a gander and give some feedback on there if you choose, my first walkthrough attempt so be gentle (constructive criticism always welcome haha)

http://forum.liberty.asn.au/viewtopic.php?f=10&t=22063

[Brunsy3.0]

I finally got around to changing out the power window switch LED's to blue

[peadya100]

Excellent work!
Inside your car must feel like a space ship now

[Brunsy3.0]

haha after my tune from XRT is takes off a bit better now
ill take a few more happy snaps as there plenty of other lights ive done though plenty more to be done haha

[Brunsy3.0]

and no im not leaving this blue led in the glovebox, I only did it as I took it apart to find what size led I needed, and as I don't have that size in white, I threw a smaller blue led in for the meantime

[Brunsy3.0]

just a quick update, getting my Raptor ceramic coated headers installed on Friday, pretty excited and a bit nervous to what noise levels it will be at

wish me luck haha

[seanmau5]

The blue looks awesome mate, nice work.

Super clean and no red!!

[Brunsy3.0]

I took the dash cluster apart the other day, it may have been a mistake haha as some of the needles don't function in their correct manner, namely the eco-meter on the spec b, but until I find out whether I can source the leds or not decides whether I wait to change it or try and fix it now, live and learn haha