Member Profile - satogixxer's GT MY10 - 374KW ATW

Show off what mods you've done to your car.

Re: Member Profile - satogixxer (GT MY10)

Postby alessandro132 » Sun Apr 28, 2013 9:06 pm

satogixxer wrote:STI front lip - yes I have thought about that a few times... no doubt will end up with one eventually haha. :lol:


Excellent :twisted: it really ties off the the front end nicely!
TEAM TOYOTA | TEAM HKS

Cusco, HPI, HKS, and a few other bits...
User avatar
alessandro132
-stickered-
 
Posts: 2380
Joined: Wed Mar 21, 2012 8:40 am
Location: Sydney
Car: 2000 JZX100 Toyota Chaser Tourer V
Real name: Al
Profile URL: viewtopic.php?f=10&t=16914

Re: Member Profile - satogixxer (GT MY10)

Postby satogixxer » Sat May 25, 2013 2:01 pm

Update at last, final (I think) performance mods now completed! :D

Picked up my car last night from Garage 88, following items now complete.

Completed mods
Custom cold air intake with BLITZ S/S filter
Garage KM1 blow off valve
Dyno tuned - 200kw atw

There were a few issues fitting the bov, so the original TRUST GReddy was not used. Michael ended up fitting a Garage KM1 blow off valve I think? (can't find it on Google though).

Anyway very happy with the results and tune so far. Performance increase feels great and is a big improvement from stock. Intake noise sounds sweet also. :D

So, updating planned mods...

Planned
STI front lip spoiler
Nav hack (maybe)
Custom plates & restyle (maybe)

Of course, I couldn't help ordering an STI front lip while I was at G88, so that's on the way soon. :wink: Should finish off the front end nicely and I had been thinking about getting one for a while anyway.

Here's some pics below and the dyno graphs. Before dyno is when the car was completely stock performance wise (orig exhaust etc.)

Cold air intake BLITZ S/S filter
Image

Dyno comparison before/after. Before is when the car was completely stock performance wise (orig exhaust etc.)
Image

As above but by RPM
Image
Last edited by satogixxer on Wed Jul 05, 2017 2:34 pm, edited 4 times in total.
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 771
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer (GT MY10)

Postby dr20t » Sat May 25, 2013 2:34 pm

Good outcome Michael - well done
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4186
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137

Re: Member Profile - satogixxer (GT MY10)

Postby satogixxer » Wed Jun 12, 2013 8:45 pm

STI Front Lip Spoiler installed at Garage 88 last night... I like it, looks nice! :D

(sorry for the shite picture, it's cold dark wet and foggy outside)

Image
Last edited by satogixxer on Wed Jul 05, 2017 2:31 pm, edited 5 times in total.
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 771
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer (GT MY10)

Postby jakey » Wed Jun 12, 2013 8:56 pm

satogixxer wrote:STI Front Lip Spoiler installed at Garage 88 last night... I like it, looks nice! :D

(sorry for the shite picture, it's cold dark wet and foggy outside)

Image


Image not working?
-Jakey-UBARU
User avatar
jakey
 
Posts: 1083
Joined: Sun Jan 29, 2012 12:13 am
Location: Melbourne
Car: UBARU - 2005 MY06 3.0R
Real name: Jake
Profile URL: viewtopic.php?f=10&t=15489

Re: Member Profile - satogixxer (GT MY10)

Postby satogixxer » Wed Jun 12, 2013 9:41 pm

Fixed.
Last edited by satogixxer on Mon Jan 06, 2014 10:28 pm, edited 1 time in total.
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 771
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer (GT MY10)

Postby dawesy » Thu Jun 13, 2013 7:07 am

Looking good mate, nice gixxer too
User avatar
dawesy
 
Posts: 584
Joined: Thu Oct 11, 2012 12:07 pm
Location: parramtta area
Car: my05 3.0R-B sedan
Real name: Chris

Re: Member Profile - satogixxer (GT MY10)

Postby Boostaddict » Thu Jun 13, 2013 8:05 am

With the first dyno graph, the one with the original power and the final power.

We're they both running the same gear?? It looks like 4th for the original and 3rd gear for the final power??
Not a Subaru...... Something MUCH better

NOPE..... That's shit too. Bus anyone??
User avatar
Boostaddict
 
Posts: 2985
Joined: Sun May 13, 2012 10:52 am
Location: Sydney
Car: 07 LGT Tuned By Sti
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=22537

Re: Member Profile - satogixxer (GT MY10)

Postby satogixxer » Thu Jun 13, 2013 9:09 am

dawesy wrote:Looking good mate, nice gixxer too


Thanks mate. Haven't ridden my bike for 7 months now (since breaking my back)... hoping to get back on it soon though! 8)
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 771
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer (GT MY10)

Postby satogixxer » Thu Jun 13, 2013 9:11 am

Boostaddict wrote:With the first dyno graph, the one with the original power and the final power.

We're they both running the same gear?? It looks like 4th for the original and 3rd gear for the final power??


The first dyno run was done when the car was completely stock - no performance mods had been made.

But yeah, I don't know what gear each run was done in, it does look like it could have been different considering the top speed.
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 771
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer (GT MY10)

Postby Gen5is » Thu Jun 13, 2013 10:06 am

Nice upgrades, 200kw should put a smile on anyones face haha.
User avatar
Gen5is
 
Posts: 797
Joined: Tue Oct 02, 2012 2:00 pm
Location: Sydney
Car: MY12 Subaru Liberty 2.5i Wagon
Real name: Eric
Profile URL: viewtopic.php?f=10&t=22586

Re: Member Profile - satogixxer (GT MY10)

Postby mongmong77 » Thu Jun 13, 2013 11:03 pm

Welcome Satogixxer !!!

Seen your car at garage 88 many times ;)
Car is looking awesome !!
Wats next ?
Whats wrong with Rice ?
mongmong77
 
Posts: 148
Joined: Sun Apr 08, 2012 10:27 pm
Location: Inner West, Sydney
Car: Subaru Liberty GT MY10
Real name: Geno

Re: Member Profile - satogixxer (GT MY10)

Postby satogixxer » Fri Jun 14, 2013 10:56 am

mongmong77 wrote:Seen your car at garage 88 many times ;)
Car is looking awesome !!
Wats next ?


Thanks mate.

Likewise. I'm surprised we haven't bumped into each other over there!

I have noticed just about every time I've been there Michael takes a phone call from you though, hehe. :lol:

Hmm not sure what's next - I asked Michael about a Cusco Master Brake Cylinder support bracket - that's probably next, once it's released! (on your list too I think?) :wink:

Starting to feel like a modding contest, haha. 8)
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 771
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

Re: Member Profile - satogixxer (GT MY10)

Postby mongmong77 » Fri Jun 14, 2013 11:41 pm

satogixxer wrote:
mongmong77 wrote:Seen your car at garage 88 many times ;)
Car is looking awesome !!
Wats next ?


Thanks mate.

Likewise. I'm surprised we haven't bumped into each other over there!

I have noticed just about every time I've been there Michael takes a phone call from you though, hehe. :lol:

Hmm not sure what's next - I asked Michael about a Cusco Master Brake Cylinder support bracket - that's probably next, once it's released! (on your list too I think?) :wink:

Starting to feel like a modding contest, haha. 8)


Hehe it is a contest my friend ;) You are my closest competitor
I have a Cusco oil catchcan made for Gen V coming soon. Looks very shiny with blue bits....
How good does the blitz intake kit sound with phats custom funnel !!!!
I always like to "remind" michael about my long list of needs....thru phone, email and face to face.
Give me a yell when you next plan on coming down to g88. I'll probably be there on Tue morn.
Have a good weekend !

Geno
Whats wrong with Rice ?
mongmong77
 
Posts: 148
Joined: Sun Apr 08, 2012 10:27 pm
Location: Inner West, Sydney
Car: Subaru Liberty GT MY10
Real name: Geno

Re: Member Profile - satogixxer (GT MY10)

Postby satogixxer » Sat Jun 15, 2013 12:24 pm

mongmong77 wrote:Hehe it is a contest my friend ;) You are my closest competitor
I have a Cusco oil catchcan made for Gen V coming soon. Looks very shiny with blue bits....
How good does the blitz intake kit sound with phats custom funnel !!!!
I always like to "remind" michael about my long list of needs....thru phone, email and face to face.
Give me a yell when you next plan on coming down to g88. I'll probably be there on Tue morn.
Have a good weekend !

Geno


Cheers mate will do. Yeah the Blitz intake sounds awesome - makes me want to change gears all the time and I swear my foot has gotten heavier! :lol:
[Liberty GT MY10 6MT]: STI bits | STI Brembo's + Dixcel | DAMD D-shape | Cusco coilovers & sways | Xtreme clutch | BLITZ pod | Plazmaman FMIC | Deshele built EJ25 | Emtron ECU | BorgWarner EFR 7670 | 374kw atw
[Outback 3R MY04]: Stock as a rock
Profile video here
User avatar
satogixxer
 
Posts: 771
Joined: Mon Oct 15, 2012 10:04 pm
Location: NSW, Western Sydney
Car: '10 Liberty GT 6MT + '04 Outback 3R
Real name: Michael
Profile URL: viewtopic.php?f=10&t=20495

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 5 guests